The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Vacuum Advance screw...anything special?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
WhiteTrashBarbie
Posted 2014-08-03 11:48 PM (#451532)
Subject: Vacuum Advance screw...anything special?



Member

Posts: 18

Location: Marina, Ca		Weird problems driving the 58 home the other night...
Pulled over and fixed a couple, but noticed that one
of the screw that hold the vacuum advance on to the
distributor body is missing.

Is this screw anything special and if not does anyone
know what size I can replace it with?

58 Plymouth Belvedere 6 cyl.

Thanks!
WTB
Top of the page Bottom of the page
57chizler
Posted 2014-08-04 1:58 PM (#451599 - in reply to #451532)
Subject: RE: Vacuum Advance screw...anything special?



Expert

Posts: 3778
20001000500100100252525
Location: NorCal
Most are #10-24 thread and very short, around 1/4" long.
Top of the page Bottom of the page
WhiteTrashBarbie
Posted 2014-08-05 4:31 PM (#451722 - in reply to #451532)
Subject: Re: Vacuum Advance screw...anything special?



Member

Posts: 18

Location: Marina, Ca		Thank you!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)