The Forward Look Network | ||
| ||
-57, 341 DeSoto, rebuilt Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> For Sale - PARTS | Message format |
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | Sold the car a few years ago still have the motor and original trans. Motor was machined and need some final assembly. EGGE Machine Parts $1,467 Eastside Machine Machine work $3,070 Hotheads Parts, Freeze plugs, Adj Pushrod set $218 Hotheads Trans adapter $562 Hotheads Mini starter, Harmonic Balancer Motor mount kit, remote oil filter Dip stick, Mopar dist adapter, Spark plug tubes, rubber seals $759 Eastside Machine Machine work &326 total (not including core) $6,402 This is what I have spent on this motor. The block has been totally machined, reground cam and crank. All new pistons bearings timing gear etc etc. Pickup only in Seattle area $3,000 | ||
GregCon |
| ||
Expert Posts: 2524 Location: Houston | $759 for spark plug tubes! | ||
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | And the items below ! Hotheads Mini starter, Harmonic Balancer Motor mount kit, remote oil filter Dip stick, Mopar dist adapter, Spark plug tubes, rubber seals $759 $6,000+ is what I spent not including the core! asking $3,000 Edited by haspe 2014-04-24 9:01 PM | ||
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | I still have a the 341 DeSoto Hemi, make an offer EGGE Machine Parts $1,467 Eastside Machine Machine work $3,070 (Prob paid to much) Hotheads Parts, Freeze plugs, Adj Pushrod set $218 Hotheads Trans adapter $562 Hotheads Mini starter, Harmonic Balancer Motor mount kit, remote oil filter Dip stick, Mopar dist adapter, Spark plug tubes, rubber seals $759 Eastside Machine Machine work $326 total (not including core) $6,402 (not sure what I was thinking) This is what I have spent on this motor. The block has been totally machined, reground cam (345 spec) and crank. All new pistons bearings timing gear etc etc. In Seattle area $3,000 Edited by haspe 2014-12-18 3:38 PM | ||
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | Make me an offer, need it gone | ||
57desoto |
| ||
Expert Posts: 1488 Location: New Castle PA | Haspe, I can't afford an extra engine right now, but do you happen to know (or can you look for ) the engine NUMBER? I'd like to have it for my 1957 DeSoto database. It's stamped on the flat area just ahead of the water pump, to of engine, kind of under the thermostat, and should be either S25-xxxx or S26-xxxx. Thank you! | ||
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | S25-3504 and 4039 above that number | ||
57desoto |
| ||
Expert Posts: 1488 Location: New Castle PA | Guess I should have looked up your real name first, before asking for that number! I already have that engine in my database, but I didn't know (or didn't remember that) you had sold the car. You also had a non-salvageable Fireflite. Do you still have it? THANK YOU. | ||
haspe |
| ||
Veteran Posts: 113 Location: Washington State, the wet side | Motor sold | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |