Viewing a thread - 1957 Desoto rebuilt 341 Hemi

You are logged in as a guest. ( logon | register )

1957 Desoto rebuilt 341 Hemi Moderators: ronbo97 Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Swap Meet -> For Sale - EBAY, CRAIGSLIST & OTHER FINDS	Message format

uncltank

Posted 2015-01-26 12:58 AM (#468621)
Subject: 1957 Desoto rebuilt 341 Hemi

Extreme Veteran

Posts: 380
100

Location: Kennewick Wa

not mine

http://kpr.craigslist.org/pts/4863618589.html

Rebuilt DeSoto 341 S26 (1957 fireDome)

$4,500 - Credit cards accepted.

Magged and Bored to 347 CID

341 New Cast (std) Pistons 9.25:1 Compression ratio

True Roller timing set

Align honed

Rotating assy balanced

Crank turned: - .030 rods & .010 mains

Square decked

ARP rod bolts

Full Gasket set

Cam ground for street performance (for best low end torque)

Heads have SS valves and hardened exhaust seats

New guides and seals

Heads and block were done by one of the best machine shops in the Pacific Northwest.

Palletized and will be delivered locally to a freight depot of your choice. No charge. Buyer pays shipping from that point on. Weight is about 600 pounds. Check with your local freight depot for shipping cost from Pasco, WA. 99301

2o6-9l4-9555

GSP392

Posted 2015-02-01 1:22 PM (#469189 - in reply to #468621)
Subject: Re: 1957 Desoto rebuilt 341 Hemi

Veteran

Posts: 209
100

Location: The Republic of Texas

My factory 2x4 intake would be nice sitting on top of that. Too bad I don't need a 341.

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)