Viewing a thread - Steering disassembly question on a 58 Coronet

You are logged in as a guest. ( logon | register )

Steering disassembly question on a 58 Coronet Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Steering and Suspension	Message format

samdjr74

Posted 2015-10-07 8:01 AM (#491639)
Subject: Steering disassembly question on a 58 Coronet

Veteran

Posts: 109
100

Hi all,

I'm getting my 58 Coronet ready for the big winter project which will be to get the power steering box rebuilt along with the pump and fix the rats nest of wires under the dash. Now I have the service manual as well as the parts book and so far I haven't been able to find a clear picture of how to disconnect the column from the box. I know I have to remove a retaining clip but is that clip in front of the flat washer or between the flat washer and the bearing as I think I see two separate retaining clips.

Thanks,
Sam

samdjr74

Posted 2015-10-07 10:22 AM (#491646 - in reply to #491639)
Subject: Re: Steering disassembly question on a 58 Coronet

Veteran

Posts: 109
100

Never mind, I figured it out. There was a conical washer that's split behind the flat washer. It looked like a second snap ring

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)