|
|
Temporarily suspended to cool off
Posts: 316
| Subject says it all. Most of the interior is gone in this car. It does has the head liner bows in it still but that is about it. Factory 2 door coupe, slant 6, 3 speed column shift car. The glass is available and in good shape, save for the windshield, which is there and unbroken but is having some seperation problems at the edges of the windshield. The body trim is all there and in good to fair condition. The bumpers are un dented but the chrome is pretty darned rough on them. Fenders and doors are straight. The hood and truck lid are good.
https://scontent-sea1-1.xx.fbcdn.net/hphotos-xta1/v/t35.0-12/1129747...
I don't have any solid plans for the car once it's stripped bare but, I'm kind of thinking about racing it in chumpcar. Now I'll need fenders and doors for that, so if anyone has some smashed up fenders or doors I kind of want them. They don't need to really work that well because... well lets face it, the brakes are going to fail and then the car becomes a miata destroying wrecking ball. |
|
| |
|
Member
Posts: 16
| What are the fin top stainless trims like? Rear quarter trim and passenger door stainless trim?
Steve
|
|
| |
|
Expert 5K+
Posts: 8445
   
Location: Perth Australia | Whats the grill like?
|
|
| |
|
Temporarily suspended to cool off
Posts: 316
| ttotired - 2015-05-25 3:53 PM
Whats the grill like?
the grill is straight but needs some serious polishing. |
|
| |
|
Temporarily suspended to cool off
Posts: 316
| sgmastus - 2015-05-25 2:05 PM
What are the fin top stainless trims like? Rear quarter trim and passenger door stainless trim?
Steve
the passenger side trim is good however the rear spear is spoken for, trading it for some wiper arms.
The fin top stainless is good and still has it's reflectors. I've had lots of questions about that part. Nobody has made a money offer as of yet. |
|
| |
|
Expert 5K+
Posts: 8445
Location: Perth Australia | If you can post a pic of the grill, that would be good
I have a pile of parts for sale as well and a guy asked about a grill and all mine arnt that good
I will forward on the details to him and if he is interested, he may contact you
He will also be in Australia, so shipping would need to be worked out (might have to be shipped to a US port to be shipped by boat?)
|
|
| |
|
Member
Posts: 16
| Hi
i dont want the cast part with the reflector
I am after the long fin top stainless trim
Plus rear quarter and door stainless side trim
|
|
| |
|
Temporarily suspended to cool off
Posts: 316
| sgmastus - 2015-05-27 3:50 AM
Hi
i dont want the cast part with the reflector
I am after the long fin top stainless trim
Plus rear quarter and door stainless side trim
the trim is pretty dull but in good shape. The door side trim is good, however, the passenger side rear quarter trim is spoken for. |
|
| |
|
Temporarily suspended to cool off
Posts: 316
| https://scontent-sea1-1.xx.fbcdn.net/hphotos-xta1/v/t35.0-12/1132742... |
|
| |
|
Member
Posts: 16
| So what price are you asking for the fin top moulds and drivers side rear quarter trim?
Also passenger door stainless trim?
Steve |
|
| |
|
Expert
Posts: 1231
Location: York County, PA | Where are you located? I am in York, PA.
Catch ya later. |
|
| |
|
Member
Posts: 6
Location: Rovaniemi, Finland | I would need:
-front valance under bumpers
-front bumpers, if straight
-steering wheel
-flasher switch plate inside steering wheel (plate+wires)
-heater switch
-Jari, Finland |
|
| |
|
Expert
Posts: 1231
Location: York County, PA | Hey Ben; how is the rear bumper, the headlight bezels, and fenders? I have beat-up fenders.
Catch ya'll later. |
|
| |
1960 Dodge Dart Seneca parts car
