Regular
Posts: 90
Location: Germany | I´ve made some 1958 Plymouth Fury fin scripts. Originals are very hard to find.
The core material is a strong resin that has been covered with a primer, then a special aluminium layer and at last a durable clear coat layer. Optically you can´t tell it apart from galvanic chrome. The coating does not yellow like other spray on chrome methods.
It comes with 4 studs on the backside as the original one has. You have to be careful with these studs. I do not recommend using self cutting nuts like the original was fitted. They may break being twisted. I would use bodywork plasticine from the back to lock them. On originals, the studs are also often broken, I guess for the same reason.
Price: $185 per piece, $370 for a set Shipping: $17,50 without insurance, $39,50 including insurance
Like the FL emblem and the caps, this price also does not cover my expenditure setup costs.
I´ve made 6 and there´s only one set left which I put on ebay. I do not plan to make more until there is really serious interest. So if you really need them, don´t miss your chance on the auction.
http://www.ebay.com/itm/201541102743 |