The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

58 Plymouth back up switch
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
evrydahero
Posted 2016-03-28 7:56 PM (#508180)
Subject: 58 Plymouth back up switch


Member

Posts: 44
25
Will a 57 Plymouth back up switch work on a 58 Plymouth powerflite? Or is there a difference?
Top of the page Bottom of the page
grunau
Posted 2016-03-30 10:17 AM (#508306 - in reply to #508180)
Subject: Re: 58 Plymouth back up switch


Extreme Veteran

Posts: 444
10010010010025
Location: North of the 49th		Hi
The trans mounted pressure switch type is the same for '57-'58 P/N 1603328 as per parts book. My '58 with Powerflite has the backup lamp switch mounted on the Button box.
Top of the page Bottom of the page
evrydahero
Posted 2016-03-30 7:31 PM (#508349 - in reply to #508180)
Subject: Re: 58 Plymouth back up switch


Member

Posts: 44
25
That's what I was asking about, I bought a push button unit but I didn't have a back up switch on it and I seen a 57 switch on ebay and was wondering if it was the same as the 58 because the part numbers were different.
Top of the page Bottom of the page
grunau
Posted 2016-03-30 9:58 PM (#508355 - in reply to #508349)
Subject: Re: 58 Plymouth back up switch


Extreme Veteran

Posts: 444
10010010010025
Location: North of the 49th		Hi
I misunderstood when you said "on" a '58 PLymouth Powerflite I thought you were talking about the the pressure switch style of backup light switch that works off the Reverse apply servo. As far as the switch on the Button box....I've never had to install a switch seperately. For a switch installation to work the button box has to have the switch actuating tang coming out the side where the switch would mount.(That part is riveted to the Reverse slide). I've interchanged complete '57 to '58 button boxes and I've never noticed a difference save for the type of connector on the wires coming from the switch and that was taken care of with a quick solder job. Perhaps that's why they are a different part number it could be that simple.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)