|
|
Member
Posts: 12
Location: Davenport, FL | Full disclosure, I am not a Forward Look guy, but I am a lifelong Mopar guy! I am building a 56 Dodge flathead six and would like to find a stock 2bbl intake for it. It's going into my 46 WC Dodge pickup. Any help greatly appreciated. Email me at olddaddy@rustyhope.com. |
|
| |
|
Expert 5K+
Posts: 9911
   
Location: Lower Mainland BC | .
And not something like this?:
https://www.ebay.ca/itm/144037526323?hash=item21894e3b33:g:bsAAAOSwX...
Edited by 56D500boy 2021-05-30 1:58 AM
|
|
| |
|
Expert
Posts: 1740
 
Location: Alaska | Are you sure that Mopar even made one of these? |
|
| |
|
Expert
Posts: 1737
Location: Hay Lakes, Alberta, Canada | I've never seen a flat head six with a two barrel carb...I believe that they only had single barrel carburetors. |
|
| |
|
Elite Veteran
Posts: 852
Location: Etters Pa | Sold the only one I ever had a month ago this past Thursday.
 (2bbl intake.jpg)
 (2bbl 2.jpg)
Attachments
----------------
 2bbl intake.jpg (151KB - 109 downloads)
2bbl 2.jpg (234KB - 117 downloads)
|
|
| |
|
Extreme Veteran
Posts: 580
| miquelonbrad - 2021-05-30 10:59 PM
I've never seen a flat head six with a two barrel carb...I believe that they only had single barrel carburetors.
My 1958 Dodge Coronet came with a 2brl. carb.
FSM has the carb. rebuilding procedure just like the 4brl.
My 1957 service manual shows the same rebuilding procedure so I know they were installed at least in 57' and 58' on Dodges. |
|
| |
|
Expert 5K+
Posts: 9911
Location: Lower Mainland BC | BHWINC - 2021-05-30 8:50 PM
Sold the only one I ever had a month ago this past Thursday.
As usual, the casting number (1632 462 in this case), is NOT the part number.
From the 55-58 Parts book:
"9-48-7 Manifold, Intake
P28 w/Power Package, D72 except Taxi, LDl except Taxi, 6 cyl, .....PN 1671 780"
Edited by 56D500boy 2021-05-31 12:43 PM
|
|
| |
|
Elite Veteran
Posts: 852
Location: Etters Pa | If I would have cared what the part # was I would have looked it up in my Library!
I simply posted the pictures I did in response to the post above mine.
miquelonbrad - 2021-05-30 10:59 PM
I've never seen a flat head six with a two barrel carb...I believe that they only had single barrel carburetors. |
|
| |
|
Expert 5K+
Posts: 9911
Location: Lower Mainland BC | BHWINC - 2021-06-01 11:03 AM If I would have cared what the part # was I would have looked it up in my Library!
I simply posted the pictures I did in response to the post above mine.
I posted the PNs mostly to show that there was a 6 cylinder "Power Pack". Probably a 2 bbl
Goes to this:
local2Ed - 2021-05-31 6:58 AM
My 1958 Dodge Coronet came with a 2brl. carb.
My 1957 service manual shows the same rebuilding procedure so I know they were installed at least in 57' and 58' on Dodges.
|
|
| |
|
Expert 5K+
Posts: 9911
Location: Lower Mainland BC | BHWINC - 2021-06-01 11:03 AM If I would have cared what the part # was I would have looked it up in my Library!
I simply posted the pictures I did in response to the post above mine.
I posted the PNs mostly to show that there was a 6 cylinder "Power Package". Probably a 2 bbl
Goes to this:
local2Ed - 2021-05-31 6:58 AM
My 1958 Dodge Coronet came with a 2brl. carb.
My 1957 service manual shows the same rebuilding procedure so I know they were installed at least in 57' and 58' on Dodges.
|
|
| |
WTB Flathead six 2bbl intake.....
