The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

voltage drop 1955 imperial
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
jed2ben
Posted 2021-04-20 8:55 AM (#611239)
Subject: voltage drop 1955 imperial


New User

Posts: 2

can I put a voltage drop off the voltage regulator wire that goes to the dash ,or do I have to put one on everything separately? I noticed from the wiring diagram that there is a wire off the voltage regulator that goes to all the dash switches
Top of the page Bottom of the page
Powerflite
Posted 2021-04-20 10:37 AM (#611241 - in reply to #611239)
Subject: Re: voltage drop 1955 imperial



Expert 5K+

Posts: 9672
5000200020005001002525
Location: So. Cal		It depends on which regulator you are going to use. Just get one with more than the required power draw from everything you plan to hook up to it, and you could do that. If you have no idea how much power everything uses, you could hook up a 6 volt batter to that wire with an amp-meter connected in between, and see how much current it pulls. Multiply that by 6 volts, and that's your power. Double that power to be safe, and that's the minimum regulator you would need.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)