|
|
Extreme Veteran
Posts: 428
 
Location: McCleary WA | I have 5 yards of correct gold vinyl for a '57 Dodge interior, purchased from SMS for $275. Asking $200 plus shipping. Also, I have a Cardone #13-36063 master cylinder, new in the box, retail $76 (Rock Auto), for $50 plus shipping. I know it fits a '57 Dodge Coronet and a '58 Plymouth Suburban, not sure what else. Lots of other '57 Dodge parts. |
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | Darryl T - 2021-12-17 12:07 PM
Lots of other '57 Dodge parts.
No sheet metal, just lots of smaller parts. |
|
| |
|
Member
Posts: 49
| Hi-
I haven't measured; is 5 yds enough to do the interior of a 57 Dodge convertible? Is the same vinyl used for the convertible top cover? Would you take $200 including shipping? My zip code is 59937.
Thanks for your time.
Wayne mayneweyer2310@aol.com |
|
| |
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | Darryl, Is the Cardone master cylinder one or two reservoirs. Wish you still have your convertible. Any small convertible parts left over? I sent you a PM I finally found the unique convertible sun visor rods with the padded Visors too. Out of Nevada. John Arvada, Colo |
|
| |
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | Wayne, I see you are restoring a 57 Dodge Convertible. What color is yours? mine is Tropical Coral and White. I have a 325 Poly In it, 4 BBL but I am building up date coated 392 dual quads for it. John Quinn Arvada, Colo |
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | main-wire - 2021-12-21 3:11 PM
Hi-
I haven't measured; is 5 yds enough to do the interior of a 57 Dodge convertible? Is the same vinyl used for the convertible top cover? Would you take $200 including shipping? My zip code is 59937.
Thanks for your time.
Wayne mayneweyer2310@aol.com
All I know is that's what my upholsterer ordered, so I assume it's enough for the seats and top cover.
PM sent. |
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | 1959 Belvedere Conv - 2021-12-22 11:18 AM
Darryl, Is the Cardone master cylinder one or two reservoirs. Wish you still have your convertible. Any small convertible parts left over? I sent you a PM I finally found the unique convertible sun visor rods with the padded Visors too. Out of Nevada. John Arvada, Colo
The master cylinder is the original single res type. Lots of parts available, PM sent with partial list. And my old convertible is currently for sale on craigslist in Austin TX. I think I'll post a link here. |
|
| |
|
Member
Posts: 49
| Hi John-
It sounds like your car is really striking, and will be fast when you're done with it. Your 59 Belvedere convertible is incredible, even without a two-tone paint scheme. My car came from the factory in all black, and has a white convertible top. Mine also has a 325 poly with about 60K original miles on it. It needs rings and valves and I want to convert it to a 325 hemi when it's apart.
The backstory on my Coronet convertible is that I bought it from the original owners in 2007 after developing a friendship over many years. They maintained it incredibly well, so a restoration, to me, isn't necessary. The original owners did have the cloth portion of the seats replaced with a fabric that approximated the original. At the time, it was just a used car and maintaining originality wasn't a priority. I was able to buy original cloth from SMS, and now that the seats need reconditioning because of deteriorating foam, I'll use that cloth when the seats are rebuilt.
Thanks for your interest in my car. I'm looking forward to seeing pictures of your Dodge when it's done.
Wayne Meyer
Whitefish, MT |
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | Gold vinyl roll is sold. Still have the m/c plus a lot of other small '57 Dodge parts - two nice sets of hood ornaments; a pair of rear antennas that will need re-plating; front fender stainless side moldings; bumper brackets; manual steering box and column; two Torqueflite shifter assemblies; lots of hub caps; RH door glass and top chrome piece for a convert or hardtop; door glass for a sedan; vent window assemblies for a sedan; brand new white convertible top still in the box; original gold convertible top cover; two standard radios; two horn rings, one very nice; stock horns; one or two complete heater assemblies; re-chromed cover below steering column on dash; re-chromed Custom Royal rear license plate surround; station wagon rear bumper guards; switches and knobs; window cranks and inside door handles; sedan window riser assemblies; wagon tailgate manual window riser; original trunk mat; e-brake handle; hemi oil filter canister; some front fender leading edge stainless; gold and chrome hood and trunk letters; grille emblem and heavy frame; power brake firewall bracket; heater control assemblies and hot water valves; tail lights and chrome bases; headlight frames; headlight buckets; shift cables; e-brake cables; lots of original wiring; generator; nice radiator; Custom Royal fender script; Suburban wagon script; wagon tailgate window stainless frame; front fender antenna; original battery mat and battery tray/platform; two cowl vent screens; pair of trunk hinges with torsion bars; hood latch parts; old door panels for patterns; probably lots more that I can't remember. I had planned to start listing them on ebay next spring but got started early. No urgency on my part, just want to make sure I don't need them for my wagon. Prices will be fair, plus shipping of course. Let me know what you need.
|
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | Convertible top cover is sold. |
|
| |
|
Elite Veteran
Posts: 943
| What styles are the door panels you have? Do you have any of the eyebrow moldings? I also need a good parking lens and a black arm rest base |
|
| |
|
Extreme Veteran
Posts: 428
Location: McCleary WA | I have photos of '57 Dodge convertible door panels and the matching rear ones. I also have panels out of my 2-door wagon but they are 100 miles away right now. I don't have any black arm rest bases, just blue and green ones. I have only one good parking light lens, but 4 rings. And I have a variety of eyebrow stainless. PM me your email address and I will send photos. Too many to post here. |
|
| |
'57 Dodge gold vinyl; master cylinder
