The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

59 Ply Fury Pushbutton Torqueflite
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
seventy7scorp
Posted 2023-06-22 8:58 PM (#630350)
Subject: 59 Ply Fury Pushbutton Torqueflite


New User

Posts: 3

Swapped out the powerflite for a torqueflite. Found a 3 spd gear selector assembly but it will require cutting out the side of the dash. Did the 59's come with the torqueflite 3 spd pushbutton? I see images of them, but cannot find any for sale.

Pete
Top of the page Bottom of the page
Myke
Posted 2023-06-22 9:51 PM (#630352 - in reply to #630350)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite



Elite Veteran

Posts: 1110
1000100
Location: Tulare Ca		Yes they were available with the auto torquefilte 3spd.
Top of the page Bottom of the page
seventy7scorp
Posted 2023-06-23 3:26 PM (#630369 - in reply to #630350)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite


New User

Posts: 3

Thanks. So they were available. Do you know if they came with the Park lever or not? My 64 assembly has that lever, which is why it doesn't fit in the dash as is.
Top of the page Bottom of the page
Finsinthemirror
Posted 2023-06-23 5:09 PM (#630372 - in reply to #630369)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite



Elite Veteran

Posts: 1116
1000100
Location: CA		If your car had an automatic to begin with it should be as simple as finding the corresponding 59 Plymouth Torqueflite parts. It should be a bolt in deal. The 59 Plymouth had a parking brake on the lower bottom of the dash, not a parking brake lever like the later cars.
Top of the page Bottom of the page
ronbo97
Posted 2023-06-23 5:10 PM (#630373 - in reply to #630369)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite


Expert

Posts: 4042
2000200025
Location: Connecticut

seventy7scorp - 2023-06-23 3:26 PM Thanks. So they were available. Do you know if they came with the Park lever or not? My 64 assembly has that lever, which is why it doesn't fit in the dash as is.

Hand brake. No parking lever. The correct 59 pushbutton assembly for Torqueflite will fit in the same location as the Powerflite pushbutton assembly.

Ron

Top of the page Bottom of the page
seventy7scorp
Posted 2023-06-23 5:55 PM (#630374 - in reply to #630350)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite


New User

Posts: 3

Thanks for the quick feedback guys.
Top of the page Bottom of the page
56D500boy
Posted 2023-06-23 10:19 PM (#630378 - in reply to #630373)
Subject: Re: 59 Ply Fury Pushbutton Torqueflite



Expert 5K+

Posts: 9910
500020002000500100100100100
Location: Lower Mainland BC
ronbo97 - 2023-06-23 2:10 PM The correct 59 pushbutton assembly for Torqueflite will fit in the same location as the Powerflite pushbutton assembly.


Agree.

If you remove the plate that sits over the shifter buttons and pull the buttons, you will see that the shifter box is held into the cosmetic housing attached to the dash by
two nuts (one each for a stud)

Have a look at this thread for more hints:

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=70346&...

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)