The Forward Look Network | ||
| ||
UPDATED - Coker Tire "Forward Look" Club Discount - March, 2009 Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Announcements -> Help With Using This Board | Message format |
Administrator |
| ||
Elite Veteran Posts: 967 Location: Pittsburgh, PA | We now have yet another new account rep at Coker -- You must call Eric Hawkins at the number below to receive the discount. Hi All, We are a go for the Club Discount (10-15%) on the tires at Coker Tire (http://www.coker.com), so if you need tires, now is a great time to get them! Here's what you need to do to get the discount.
Here's a few key points:
-Dave | ||
Administrator |
| ||
Elite Veteran Posts: 967 Location: Pittsburgh, PA | *bump* | ||
bhigdog |
| ||
Regular Posts: 73 | AHHH, Fantastic. I need 5 new bias plys for my 56 NY'er project. I'll let you know how I do. Thanks again........Bob | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13055 Location: Southern Sweden - Sturkö island | Is there a discount for balancing weights as well? Edited by wizard 2010-03-23 3:20 AM | ||
BigBlockMopar |
| ||
Expert Posts: 3575 Location: Netherlands | Bhigdog, you might want to do a little searching around on how Coker 'is doing'... | ||
StillOutThere |
| ||
Location: Under the X in Texas | What we are trying to say is read the thread at http://www.forwardlook.net/forums/forums/thread-view.asp?tid=29876&... BEFORE you buy Coker tires. Wink Wink | ||
PolaraPaul |
| ||
Extreme Veteran Posts: 335 Location: California/Wisconsin | Tried calling Coker, got Irwin and he states "club order" must now be for 25 tires at once... | ||
jonnblaze |
| ||
Spammer 2014-09-24 Posts: 1 | I need 5 new bias plys for my 56 NY'er project. I'll let you know how I do. Thanks again........Bob | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | Bob, you should seriously consider buying a set of the Goodyear Super Cushion tires that are being re-popped now. Big M, on this website, has them on his daily driver 57 Fury; saw it/him at Hot August Nights and the tires have great tread- wear/life expectancy on them, and he was highly complimentary of their construction and their performance. | ||
fenix |
| ||
Expert Posts: 2120 Location: atlanta | Really D500, tell me more, bias, vendor, price? | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | John Big M has all of the information on his tires. I saw the fronts at Hot August Nights, and thought that they might be new (great tread remaining; no real wear on them). John said that his Fury was a daily-driver with them-on it. I think that the Super Cushions retail for about $150.00. My present Federal brand van-rated radials are apparently NLA, but they cost about $200.00 each 6-7 years ago. A couple interesting factoids about radial tires (from Hemmings Classic Cars, 9/13) is that they 'need' more positive caster, and positive camber adjustments than bias ply tires, because radial sidewalls can cause the car to wallow and to wander. Positive camber and positive caster will create a self-centering action in the steering system. Bias ply tires, with positive caster/camber adjustments, and with rebuilt steering and suspension systems should perform 'almost' as well as performance radials, and they should provide a more comfortable ride, than steel belted radials. | ||
jimntempe |
| ||
Expert Posts: 2312 Location: Arizona | All that may be true but my only real world experience with switching from bias to radials says it was true on one car but not true on another. On a 69 Firebird 400 that came with the Belted wide ovals I could run the car up to 134 mph (hitting the 5000 rpm redline) and the car was rock steady. When I put on radials it became squirrely at anything over 90 mph. Numerous alignments and changes of radial tires never changed that. However, on another 69 400 with radials I had no problem with stability up to the 120 mark, fastest I took that car. Can't say I noticed any difference in ride between the belted/bias and the radials. A 72 Datsun I had with plain bias tires rode rough and tracked all over the road (manual steering). Not a very pleasant car to drive. I put a set of radials on it and it was like a whole new car. Smoothed out the ride and all the tracking and jerking and hard steering went away. Didn't get it aligned with the new tires so it wasn't the alignment. | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13055 Location: Southern Sweden - Sturkö island | Knowing what we do, the real question is : why would anyone want a Cooker tire? | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | I drove a rental 1969 Charger R/T...with its OEM red streak Wide-Boots (or whatever they were). I remarked to my passenger that that car rode as well, at 80 MPH, as my family's living room couch (standing-still). We (most of us, anyway) don't drive on the Wide Boots, but that Charger had NO handling problems, with those bias belted tires on it. Horrie's next set of tires may well be Goodyear Super Cushions. | ||
60 dart |
| ||
Expert 5K+ Posts: 8948 Location: WHEELING,WV.>>>HOME OF WWVA | oh my , how did we ever drive with biased ply tires back in the day ?-----------------------------------------------------------later | ||
FIN_NV |
| ||
Expert Posts: 4589 Location: Northern New Jersey | Can't Dave get us a discount at Diamondback Classics? | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |