![]() | ||
The Forward Look Network | ||
| ||
![]() Moderators: wizard, Windsor59 Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Local Regions -> Scandinavian Region | Message format |
55CRL![]() |
| ||
Elite Veteran Posts: 907 ![]() ![]() ![]() ![]() ![]() Location: Magra, Sweden | Folks, what's going on in your garages? Spring isn't too far away... I've took a rest in redoing a brand X transmission, sat down admiring my beauty. ![]() Next will be to replace the ujoints. (Dodge 126 resize.jpg) Attachments ---------------- ![]() | ||
| |||
BigBlockMopar![]() |
| ||
Expert Posts: 3575 ![]() ![]() ![]() ![]() ![]() ![]() Location: Netherlands | Not much... ![]() ![]() ![]() | ||
| |||
chrysler300c![]() |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 ![]() ![]() ![]() ![]() ![]() ![]() Location: Twin Falls, Idaho | These shops/garages are MUCH TOO CLEAN to get any work done in them. I wouldn't be surprised if you could actually walk over to the tool box and find the right tool in the drawer where it is supposed to be located. I will have to find some pictures of our shop/garage and post it here. Many times we need to go out and buy a new tool because we can't find it in the shop.... as soon as we do that, we find the old one buried somewhere. If we don't find it then, we will find it when we are looking for something else. I am puzzled as to how you get anything accomplished with these neat and clean garages. George | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13062 ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | My garage is so narrow that I cannot even get a sideview picture, I've managed to do some Bit's N Pieces http://www.youtube.com/watch?v=fWLF5irmC-Q anyway! Chopped the front manual benchseat frame to the same measures as a 6-way benchseat frame - now I can tilt the seat as it was meant to (check the floor to seat distance) Installed the new padded dash and the optional clear lucite padded steering wheel Installed the optional rear bumper guards (Benchseat_before.jpg) (Benchseat_after.jpg) (Dash_before.jpg) (Dash_after.jpg) (Rear bumper_before.jpg) (Rear bumper_after.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() ![]() ![]() | ||
| |||
345 DeSoto![]() |
| ||
Expert Posts: 1302 ![]() ![]() ![]() ![]() Location: Skaneateles,NY(summer)/Port St.Lucie,FL(winter) | I only hope that when I put my DeSoto up for sale this Spring, that it will go to Sweden. The workmanship on the cars I've seen is not to be equaled... | ||
| |||
55CRL![]() |
| ||
Elite Veteran Posts: 907 ![]() ![]() ![]() ![]() ![]() Location: Magra, Sweden | You're welcome to sell your DeSoto to Sweden, I'm sure it would be well cared over here. Unfortunately the US Dollar is very strong versus the Swedish Krona, increased about 45% since last summer. On the other hand I think shipping costs are going down due to the financial downturns. | ||
| |||
55CRL![]() |
| ||
Elite Veteran Posts: 907 ![]() ![]() ![]() ![]() ![]() Location: Magra, Sweden | I've finished the Ranco Heat Control Valve repair with the help of a $9.99 kit from Napa. I hope this one will last the next 50+ years ![]() Will be nice to have heat and a working defroster, the Swedish summer evenings are not always warm enough. (Ranco Valve.jpg) (Ranco Valve Napa repair kit.jpg) (Ranco Valve repair.jpg) (Ranco Valve repaired.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() | ||
| |||
1960fury![]() |
| ||
Expert 5K+ Posts: 7453 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: northern germany | 55CRL - 2009-02-20 1:40 PM I've finished the Ranco Heat Control Valve repair with the help of a $9.99 kit from Napa. I hope this one will last the next 50+ years ![]() oh yes, that's one reason i love our cars. the parts last forever and if something breaks its repairable. try that with a 2009 car in 2059! (if you can still find one) Edited by 1960fury 2009-02-20 4:51 PM | ||
| |||
Windsor59![]() |
| ||
Expert Posts: 2596 ![]() ![]() ![]() ![]() ![]() Location: Upplands Väsby, Sweden | I was at some freinds last week end. And here some pics fron one off many garage with Forward Look cars. 3 Imperial 1959, one 4 dr/ht, one 2dr/ht an one convertible and all was Black. Beuty cars ![]() (DSCN1807 - Kopia.JPG) (y812.jpg) Attachments ---------------- ![]() ![]() | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13062 ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | Wow! Thats a nice collection! I your friend a member of this site Jocke? If not, please introduce him to our site. | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13062 ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | 55CRL - 2009-02-20 7:40 PM I've finished the Ranco Heat Control Valve repair with the help of a $9.99 kit from Napa. I hope this one will last the next 50+ years ![]() Will be nice to have heat and a working defroster, the Swedish summer evenings are not always warm enough. Thord, do you happen to have the order number for the Napa kit? | ||
| |||
Sisu![]() |
| ||
Inactive by Request Posts: 1292 ![]() ![]() ![]() ![]() ![]() ![]() Location: Lovely place | That Imperial collection is unbelievable. All black cars... He has some real style! | ||
| |||
1960ny![]() |
| ||
Extreme Veteran Posts: 467 ![]() ![]() ![]() ![]() ![]() ![]() Location: Sweden | Different kind of garage pic! Outside garage. (IMGP2181red.JPG) Attachments ---------------- ![]() | ||
| |||
Windsor59![]() |
| ||
Expert Posts: 2596 ![]() ![]() ![]() ![]() ![]() Location: Upplands Väsby, Sweden | Cool cars pic, look is spring there in Skåne. | ||
| |||
1960ny![]() |
| ||
Extreme Veteran Posts: 467 ![]() ![]() ![]() ![]() ![]() ![]() Location: Sweden | Jocke! Skåne is 300 km south of me! The pic is from last fall. Just thought it was a nice pic with some clear sky. I wish we had some nicer wheater! I still have a lot of sandblastering to do on the -59 300E. But with this wheater i cant. To much moist in the air right now Jörgen | ||
| |||
Cowboy![]() |
| ||
Veteran Posts: 198 ![]() ![]() ![]() ![]() Location: Bornholm / Denmark | . Jeg forsøker skruva ihop min motor..;-) (30.jpg) Attachments ---------------- ![]() | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13062 ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | Hello cowboy - "long time no see" | ||
| |||
Windsor59![]() |
| ||
Expert Posts: 2596 ![]() ![]() ![]() ![]() ![]() Location: Upplands Väsby, Sweden | Have you found what color it is orginal at your DeSoto engie, silver? Hope see your car to sommer 2009 | ||
| |||
Cowboy![]() |
| ||
Veteran Posts: 198 ![]() ![]() ![]() ![]() Location: Bornholm / Denmark | - Yes, - long time no see..;-) The engine is just gotta get plain silver for now... Got my tranny back from Malmoe last feb. but had an operation in my shoulder at the same time, - and the Challenger was turn key, so, the DeSoto was just left there for all of 2008.. It's gonna be used this year..;-) | ||
| |||
Windsor59![]() |
| ||
Expert Posts: 2596 ![]() ![]() ![]() ![]() ![]() Location: Upplands Väsby, Sweden | It takes time to do all finsh, I know not finish with all and I have my car running one season. It bee great when your 383 engie is back and running good. | ||
| |||
Fireflite60![]() |
| ||
Extreme Veteran Posts: 322 ![]() ![]() ![]() Location: Finland | Daily work is taking all my time so not much going on in my garage... I want to be back on the road at 1st of May so I have to keep my "to do" list as short as possible. Before season opening I´d like to change seat covers, change the rear springs, change the exhaust pipes and install the Rock`n`roll equipment. If daily work is not disturbing too much I just might be able to change also altenator, distributor and intake manifold (60`s Weiand with 3 x 2 bbl). Work started yesterday with a little help: http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/2.html
Old seat cover removed: http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/12.html http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/10.html
http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/13.html http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/14.html
http://public.fotki.com/Juppee/my-projects-and-stuff/random-pictures-car/random-pictures-nee/16.html
EDIT: Sorry for the links but I couldn`t get pictures here... Wizard, how the h*ll I can attach photos nowadays?
Edited by Fireflite60 2009-03-13 11:17 AM | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13062 ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | Jupe, there's two options; box the attach a file after posting when posting a new topic, or Add / Remove attachments when you edit a post. The seatcovers looks nice actually, I'm sure that the final result will be really good. | ||
| |||
Sisu![]() |
| ||
Inactive by Request Posts: 1292 ![]() ![]() ![]() ![]() ![]() ![]() Location: Lovely place | Jupe, you are pointing to a HTML-page, not the image file! | ||
| |||
FinFury57![]() |
| ||
Elite Veteran Posts: 693 ![]() ![]() ![]() ![]() ![]() Location: Kangasala, Finland | Ok, here... ![]() http://images14.fotki.com/v361/photos/7/797113/6059572/P3110634-vi.... ![]() http://images46.fotki.com/v1453/photos/7/797113/6059572/P3110632-vi... ![]() http://images45.fotki.com/v1480/photos/7/797113/6059572/P3120635-vi... ![]() http://images45.fotki.com/v1450/photos/7/797113/6059572/P3120636-vi... ![]() http://images49.fotki.com/v1456/photos/7/797113/6059572/P3120638-vi... Edited by FinFury57 2009-03-12 6:33 PM | ||
| |||
FinFury57![]() |
| ||
Elite Veteran Posts: 693 ![]() ![]() ![]() ![]() ![]() Location: Kangasala, Finland | Jupe, the syntax is [ img=URL ]. for example: [ img=http://images49.fotki.com/v1456/photos/7/797113/6059572/P3120638-vi.jpg?1236880971 ] Just take the empty spaces off next to '[ ' and ' ]' and it works. | ||
| |||
Fireflite60![]() |
| ||
Extreme Veteran Posts: 322 ![]() ![]() ![]() Location: Finland | Thanks guys for all the tips but I´m totally left handed here.... I have attached pictures earlier but now it seems to be mission impossible. Only change has been that now I use mozilla instead of IE. Shouldn`t make any difference?
Testingtesting *now I actually got a picture here but it came up in huge size* **second test and I finally succeed... Have to get picture of my 3 x 2 bbl here* ![]() Edited by Fireflite60 2009-03-13 11:39 AM | ||
| |||
Sisu![]() |
| ||
Inactive by Request Posts: 1292 ![]() ![]() ![]() ![]() ![]() ![]() Location: Lovely place | Jupe, I'm left handed. What you have against left handed?!
Actually the best guy to get advice is FinFury57, this all is his profession. He could also make such tricks that would blow our minds. So better be friends with him or he shows his amazing 3D sprite animations he did with his right hand. Edited by Sisu 2009-03-13 3:05 PM | ||
| |||
FinFury57![]() |
| ||
Elite Veteran Posts: 693 ![]() ![]() ![]() ![]() ![]() Location: Kangasala, Finland | ![]() | ||
| |||
FinFury57![]() |
| ||
Elite Veteran Posts: 693 ![]() ![]() ![]() ![]() ![]() Location: Kangasala, Finland | Nice intake Jupe! Btw, are you keeping the old 2bbl carb - choke - air cleaner - linkage? I could use them and ditch the newer Holley I have. | ||
| |||
Fireflite60![]() |
| ||
Extreme Veteran Posts: 322 ![]() ![]() ![]() Location: Finland | Sisu - 2009-03-13 9:53 PM Jupe, I'm left handed. What you have against left handed?!
Actually the best guy to get advice is FinFury57, this all is his profession. He could also make such tricks that would blow our minds. So better be friends with him or he shows his amazing 3D sprite animations he did with his right hand.
Sisu, You have to learn how to read between the lines, there is a lot of self irony on that clause... I`m 100% left handed myself (and proud of it), and even my daughter is left handed | ||
| |||
Fireflite60![]() |
| ||
Extreme Veteran Posts: 322 ![]() ![]() ![]() Location: Finland | FinFury57 - 2009-03-13 10:51 PM Nice intake Jupe! Btw, are you keeping the old 2bbl carb - choke - air cleaner - linkage? I could use them and ditch the newer Holley I have. Jan, I´m keeping all the original parts for the reason if I want to turn everything back to original glory one day (when I get old enough to be called as pussihousu). Actually I have two of those original 2bbl`s... If you are interested. Other parts can be easily found on eBay with reasonable price... PS. Not so long time before the HR&R Show... How can we get left handed Sisu also there + vänster hand språkiga Wizard också | ||
| |||
Sisu![]() |
| ||
Inactive by Request Posts: 1292 ![]() ![]() ![]() ![]() ![]() ![]() Location: Lovely place | Fireflite60 - 2009-03-14 11:57 AM I recently visited Sudan and when using my left hand during dinner I´m sure that I was a bad boy ![]() I'm sure they were wondering why you were smiling when you offered them food with your right hand Btw, I'm deeply ashamed but last time I was at Hot Rod & Rock Show in Tampere, 2002 - I won the Eurocar 1st prize Regards, Young "pussihousu"
Edited by Sisu 2009-03-14 11:38 PM | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |