Viewing a thread - converted power steering column

You are logged in as a guest. ( logon | register )

converted power steering column Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> The Exhaust Pipe - Modification & Performance	Message format

60 dart

Posted 2009-07-29 3:49 PM (#183118)
Subject: converted power steering column

Expert 5K+

Posts: 8948
5000

Location: WHEELING,WV.>>>HOME OF WWVA

converted to non power column . today i used my new spot STARTING LINE gun made by DEVILBLIS . i am glad i got it . very little over spray which means most of the paint on part this is going to work rather well ! you know the non power steering cars back then , most weren't all that bad steering , the tough part is turning from a stand still but if moving not bad at all------------------------------------------------------later

(006.JPG)

(017.JPG)

(018.JPG)

Attachments
----------------

006.JPG (140KB - 189 downloads)
Attachments

017.JPG (73KB - 184 downloads)
Attachments

018.JPG (96KB - 170 downloads)

60 dart

Posted 2009-07-30 3:47 PM (#183257 - in reply to #183118)
Subject: Re: converted power steering column

Expert 5K+

Posts: 8948
5000

Location: WHEELING,WV.>>>HOME OF WWVA

painted

(steering column-------painted 001.JPG)

Attachments
----------------

steering column-------painted 001.JPG (155KB - 164 downloads)

57plymouth

Posted 2009-07-30 9:02 PM (#183297 - in reply to #183118)
Subject: Re: converted power steering column

Expert

Posts: 3577
2000

Location: Blythewood, SC

Are manual steering columns that hard to find? I would have thought that you could have made some pesos selling it and buying a manual column.

57plymouth

Posted 2009-07-30 9:04 PM (#183300 - in reply to #183118)
Subject: Re: converted power steering column

Expert

Posts: 3577
2000

Location: Blythewood, SC

But you did a good job!

60 dart

Posted 2009-08-02 9:58 AM (#183567 - in reply to #183118)
Subject: Re: converted power steering column

Expert 5K+

Posts: 8948
5000

Location: WHEELING,WV.>>>HOME OF WWVA

THANKS BRIAN , i wanted manual steering with the upper look of the power column and wheel , so it got fabricated . it's easier with the manual setup but i think looks better this way . don't know why the factory didn't do it this way for both-------------------------and i do have a manual column but not the column to dash filler but again the power setup looks better-----------------------------------------------------later

B/G 61

Posted 2009-08-03 5:19 PM (#183766 - in reply to #183118)
Subject: RE: converted power steering column