The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

how does one shut down idle circuits on outboard trip carbs ?
Jump to page : 1 2
Now viewing page 2 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
wizard
Posted 2013-03-04 1:58 AM (#362926 - in reply to #351747)
Subject: Re: how does one shut down idle circuits on outboard trip carbs ?



Board Moderator & Exner Expert 10K+

Posts: 13050
50005000200010002525
Location: Southern Sweden - Sturkö island		Looks really sharp Chuck! Get yourself an antistatic wrist strap and ground yourself while you do the buffing. I know all about those jolts, sometimes they hit you so hard that you might damage the part your buffing or, worse yourself
Top of the page Bottom of the page
60 dart
Posted 2013-03-04 3:39 AM (#362931 - in reply to #351747)
Subject: Re: how does one shut down idle circuits on outboard trip carbs ?



Expert 5K+

Posts: 8947
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA		thanks buddy , i thought about a ground strap but then murphy's law popped in my head and i had visions of gettin tangled in the buffer ------------------------------------------later
Top of the page Bottom of the page
60 dart
Posted 2013-03-11 12:36 AM (#364065 - in reply to #351747)
Subject: Re: how does one shut down idle circuits on outboard trip carbs ?



Expert 5K+

Posts: 8947
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA		all done except a couple of very minor things , like a new temp sender . the linkage is adjusted to @ 55 % to full open . i really don't think it needs to be any
sooner than that for the street . i may even adjust the ends to open a total of @ 85 % or a touch less . at @ 835 cfm it's gonna suck fuel ! ---------------later

pssssss . with the air cleaners lowered , using the rubber rings they set @ 1/8in. shorter than a set of holley 94's

Edited by 60 dart 2013-03-11 12:41 AM




(finished carbs 002.JPG)



(finished carbs 004.JPG)



Attachments
----------------
Attachments finished carbs 002.JPG (134KB - 155 downloads)
Attachments finished carbs 004.JPG (133KB - 159 downloads)
Top of the page Bottom of the page
wizard
Posted 2013-03-11 2:37 AM (#364088 - in reply to #351747)
Subject: Re: how does one shut down idle circuits on outboard trip carbs ?



Board Moderator & Exner Expert 10K+

Posts: 13050
50005000200010002525
Location: Southern Sweden - Sturkö island		Artwork Chuck, real artwork
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)