The Forward Look Network | ||
| ||
'59 Dodge Custom Royal 4dr HT Jump to page : 1 2 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> Members Rides | Message format |
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Where do I stop? When do I stop? I need to stop!!! Why do I want to stop? I DON'T WANT TO STOP. I feel much better now. Here is the latest!!! Where is the VIN tag located? Please don't tell me the drivers door post because it is not there. Edited by oldwood 2014-01-11 10:12 PM (006.JPG) (013.JPG) (002.JPG) (008.JPG) (011.JPG) (010.JPG) Attachments ---------------- 006.JPG (206KB - 149 downloads) 013.JPG (249KB - 139 downloads) 002.JPG (247KB - 138 downloads) 008.JPG (165KB - 133 downloads) 011.JPG (123KB - 149 downloads) 010.JPG (190KB - 138 downloads) | ||
henricthornsund |
| ||
Location: Sweden | Good find there, Dorsey! One cant get enough of them! | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | VIN is located on top of the firewall on passenger side. It's combined with the dataplate. I believe the cars built in Newark, DE, have it near the master cyl. Ron | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | No VIN plate at the Data Plate or by the Master Cyl. Is the VIN included in the Data Plate info??? This is a factory 4bbl car but not sure what size engine. (024.JPG) (026.JPG) Attachments ---------------- 024.JPG (219KB - 144 downloads) 026.JPG (268KB - 130 downloads) | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | I just managed to bulk-erase my whole message; wasn't important, anyway! Asked if you've looked for the Broadcast Sheet, yet, and posted the image of this P/T plate before you posted your car's P/T. The B-Sheet might also be found folded up underneath the carpeting, as well as behind the glove box. Mentioned that your P/T is coded for having both the quarter panel chevrons and the end-of-fin chrome 'Sweep' molding. Said that your car was built o.o.a. 3/17/59 (apparently), and that its interior motif looks like Neutral, so with Swivel seats: S78. Edited by d500neil 2014-01-11 6:22 PM (PICT4741.JPG) Attachments ---------------- PICT4741.JPG (100KB - 143 downloads) | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Thanks Neil and others for the VIN/Serial # location. I'm familiar with VIN location on '60 and '61 Plymouths. Here are some pics showing the major rust problems. However, I'm really happy with floor pans. The passenger front pan has bad rot. The other 3 pans are solid. What year and makes interchange with the '59 Dodge. I need a windshield and trunk pan. Arkansas in not AZ or CA so we have our share of RUST. I didn't realize how scarce '59 Dodges are, even on this web site. Arkansas is expected to have 5-6 days of sunshine so now is the time to see if this car will run. Edited by oldwood 2014-01-11 8:45 PM (004.JPG) (014.JPG) (022.JPG) (015.JPG) (017.JPG) Attachments ---------------- 004.JPG (243KB - 134 downloads) 014.JPG (175KB - 217 downloads) 022.JPG (142KB - 134 downloads) 015.JPG (207KB - 138 downloads) 017.JPG (163KB - 137 downloads) | ||
toddst |
| ||
Elite Veteran Posts: 726 Location: Some Island called Prince Edward | Awesome find! 59 Dodge's are my favorite. | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | Neil - Who owns the turquoise and white Coronet convertible that is shown in your dataplate pic ? That one is not in the registry. Ron | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | oldwood - 2014-01-12 12:35 PM Thanks Neil and others for the VIN/Serial # location. I'm familiar with VIN location on '60 and '61 Plymouths. Here are some pics showing the major rust problems. However, I'm really happy with floor pans. The passenger front pan has bad rot. The other 3 pans are solid. What year and makes interchange with the '59 Dodge. I need a windshield and trunk pan. Arkansas in not AZ or CA so we have our share of RUST. I didn't realize how scarce '59 Dodges are, even on this web site. Arkansas is expected to have 5-6 days of sunshine so now is the time to see if this car will run. ..... .. Congratulations on your new '59 Dodge from another '59 Dodge owner Good to see another '59 Dodge owner on here... If this is any help here's a trunk floor pan on evilbay http://www.ebay.com/itm/TRUNK-FLOOR-PAN-CHRYSLER-DESOTO-DODGE-1957-... BUT....... I've read on here when I first bought my '59 Dodge that these are not much better than buying flat sheet metal , don't look like the OEM and would work if you aren't fussy but if you are a purist restorer then it may not be for you. Same with the floor pans here..... so I've also read.......... http://www.ebay.com/itm/LEFT-SIDE-UNDER-THE-FRONT-SEAT-FLOOR-PAN-CH... My trunk floor pan wasn't quite as bad as yours seems to be in your pics but not too far from that condition anyway. I eventually got a not-too-bad one from John at BIG M which was from a '58 Desoto Firesweep. John said the Desoto Firesweeps share the same/similar chassis as Dodge so that might help expand your searching horizons when you start looking for a better one. When it arrived here in Australia a few months later it was exactly the same as my '59 Dodge trunk floor pan and was just as John described along with the pics he sent me before I bought it so I was happy with it. It was the best one he had at the time, maybe give John a call, he might have some more stock come in since I bought mine from him. I know Jerry ( 59 in Calif ) on the forum here has done his '59 Dodge trunk pan and is way ahead of me in his trunk floor pan rebuild so maybe Jerry could offer some advice based on his experience with his car. Jerry has helped me a heck of a lot with pics of his trunk floor rebuild, certainly helps me so that when my chemotherapy is over so I can get into starting some actual work on my Dodge. So, in a nutshell, from what I've been able to find out , the Dodge's from '57 to '59 share the same floor pans and trunk pan along with the '58 Desoto Firesweep which also ( at least ) shares the same trunk pan as well, maybe ??? also the '57 and '59 Desoto's also ??? and maybe ?? their floor pans are the same ????? Windshields ?? ............ Here's one that says it fits your 4 door hard top http://www.ebay.com/itm/1957-1959-Chrysler-Dodge-Plymouth-Windshiel... Hope this info is of help to you...... Terry. ..... .. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Thanks, Terry on the Yr. and models that work. I have a couple of '57 Plymouth parts cars so maybe I have a good windshield. Maybe John(Big M) will chime in soon on application info. I'm sure that I'm like most of ya'll in that I want to hear it run. I did get most of the wet carpet out yesterday. I'm going to pull the seats and vacuum it well. The door panels are in excellent shape. Headliner cardboard is droopy but not broken,yea!!! I know how to fix that problem. I've read that there were less 4dr HT's made than 2dr HT's. I'm trying to get with the original owners wife to get any extra info and documentation on this car. I'm hoping for pictures of when it was new. I feel lucky to have the cars that I've kept and I just want to keep this swivel seat 4dr HT. Edited by oldwood 2014-01-12 2:21 AM | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I'm cleaning out this car and here are a few teasers!!! (001.JPG) (005.JPG) (006.JPG) Attachments ---------------- 001.JPG (181KB - 236 downloads) 005.JPG (166KB - 210 downloads) 006.JPG (132KB - 131 downloads) | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I spent most of the day cleaning it out. I pulled the seats out and found some treasures. I found 3 of these hub caps in the Hoarders house and put them on for some bling pictures. The floors pans were in really good shape considering this car was licensed last in 1972. The worst damage was confined to the passenger front. A few more years of wet carpet and well you know. Edited by oldwood 2014-01-12 4:08 PM (007.JPG) (009.JPG) (010.JPG) (012.JPG) (013.JPG) Attachments ---------------- 007.JPG (237KB - 132 downloads) 009.JPG (197KB - 132 downloads) 010.JPG (231KB - 125 downloads) 012.JPG (212KB - 124 downloads) 013.JPG (192KB - 133 downloads) | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Here are the items I found in the car. I haven't gone through the contents of the trunk yet. (015.JPG) (016.JPG) (021.JPG) Attachments ---------------- 015.JPG (110KB - 131 downloads) 016.JPG (134KB - 131 downloads) 021.JPG (204KB - 136 downloads) | ||
SavoyPlaza |
| ||
Elite Veteran Posts: 1172 Location: Georgia | Thats a good score, Dorsey! Looks like a fisherman owned her at some point. I need that Pabst church key! It seems that this sickness is going around something fierce! I just bought a Coronet sedan from Wayne, pictured below. Wayne is a good guy to deal with. If you find the cure, Dorsey, that'll make it stop, let me know. Don't tell my wife, though!! Pete (Jan13,2014.jpg) Attachments ---------------- Jan13,2014.jpg (247KB - 141 downloads) | ||
firedome |
| ||
Expert Posts: 3155 Location: NY & VT | 4 dr Hardtops RULE! The prettiest FL roofline imho... Hope this one can be saved, with the help of John Big M those floors should be do-able! 1945 quarter = real 92% silver... score! | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Pete you are the 2nd person wanting that church key. Yea i was hoping to find a BAG of those quarters but I'm grateful for the 1. With change that I've found in this car I have made a profit over what I paid for it. I do have some beach front property for sale if you believe that. I've been known to part out a car but not a 4dr HT. I hope to have it running before the end of the week. | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | SavoyPlaza - Any more pics of your 59 Dodge ? Is it a 6 or V8 ? Options ? Ron Edited by ronbo97 2014-01-13 7:47 PM | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | Ron, I checked my 59 file folder, and all I have on that vert is its removed P/T plate. however, that plate's image may have been sent by Kent Johansson. Dorsey, there are no code-stampings shown at the upper-right area of your car's Broadcast Sheet? Where did you find it, in the car? | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Here are 2 new pics of the Car Production Broadcast sheet that I found on top of the glove box. The right hand corner got wet or ???. There are 3 #'s in the right hand corner of this sheet. I believe they are 103. I know the 1 and 3 are correct #'s but the 0 is faint and may be another number. What is all of the info in the Special Instruction Box??? What size engine is in this car. It is a 4bbl engine. I haven't found the Engine #. What does "1" mean under axle ratio? what does "5" mean under A/C/Heater? Edited by oldwood 2014-01-14 12:30 AM (026.JPG) (027.JPG) Attachments ---------------- 026.JPG (131KB - 136 downloads) 027.JPG (174KB - 208 downloads) | ||
ronbo97 |
| ||
Expert Posts: 4043 Location: Connecticut | You have a 361 in your beast. Ron | ||
moparsteve |
| ||
Elite Veteran Posts: 1155 Location: somerville mass | hi dorsey great find! that 45 quarter is silver. may be worth something! ok im third in line - i want that church key!!!!! | ||
rockerarm |
| ||
Elite Veteran Posts: 873 Location: ALABAMA, HEART OF DIXIE | Dorsey, you may get lucky and it will stop ............. In your NEXT life. What a beauty that Dodge must have been when new. Nicely equipped too. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I met the granddaughter of the man who owned this car. She claims that he bought it new. However the dates on the title says it was bought in 1963 with a lien amt. of $1,463.76. The granddaughter is going to get me photos of when he bought it. The motor turns over but I pulled the plugs to fill the cyl's with MMO. I hope to fire it up soon. I guess I could order the Chrysler report to see where it was delivered. Edited by oldwood 2014-01-17 5:00 PM (001.JPG) Attachments ---------------- 001.JPG (164KB - 134 downloads) | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | ... I find it really fascinating when old cars come with a some of their history, my Dodge came with receipts dating back to 1985. Love seeing threads like this showing historical paperwork telling the cars storyline Same guys hand writing in same blue pen on your broadcast sheet as is on my broadcast sheet and seems to be the same as other 59 Dodge owners that have been posted their sheets up here on the forum. ... | ||
notweak2 |
| ||
Regular Posts: 99 | Great find, Dorsey! | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I got the plugs back in and noticed the rotor was not secure on the distributor shaft. I got one tonight and put it on but still not running even though pouring gas down carb. I checked the fuel pump and its not pumping. I think the starter is dragging some. I knew it was going to take some effort since it was last tagged in 1972. I'm glad I have a 1960 Matador parts car with a 361. I'll probably pull the starter off of it. I do have headlights, horn, taillights and blinkers. I just have to work out the bugs. | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | .... Just getting back to your need for a replacement trunk floor, here's an ebay link showing a Desoto Firesweep. If you scroll through the photos you can see a pic of the trunk floor pan in the Firesweep you'll notice it's the same as the one in your '59 Dodge ( if you can imagine your 59 Dodge without the rust outs ) . http://www.ebay.com/itm/DeSoto-Firesweep-Base-1957-desoto-firesweep... So that's an option if you can't get one from a 59 Dodge. I've seen a trunk floor from a 58 Plymouth down here in Australia and it doesn't look the same as my 59 Dodge trunk floor, maybe it could fit ?? but it's swage lines are different. Hope that;s of help to you. .... .. | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | Dorsey, there are no options codes at the top right of your car's Broadcast Sheet; just wanted to be sure. The hand written 1 & 3 are inspector's marks. The hand written notations on the Special Instructions were for the benefit of the dash board's assemblers and painters. It specifies that your dash be constructed to represent A Custom Royal hardtop, in the Tan motif (from your initial photos, I had thought that its scheme might have been 'Neutral', but it is finished in the Tan scheme). The 'N' is also the Final Inspector's approval notation. Its axle ratio is the standard 2.93:1 . What is relatively unusual about your ride is that it is a Top of the Line model, but lightly optioned, but, it has the Swivel Seat installed in it....in a 4-door hardtop. Edited by d500neil 2014-01-19 4:49 PM | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Thanks Neil for the info. I thought I would have it running by now but my battery went south. Even though its a low option Custom Royal I'm really excited about it being a 4dr HT. Now if I could just find one of those Blondes, Brunettes, Red Head with Loooooong Legs to model the swivel seat. I know I'm REAL SICK!!! | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | For the hobbyist, your car provides a nice platform for the installation of various-all of the available factory options. Saw Bob Lutz's trophy wife pull off the 'legs' move, getting out of a Viper; no reason that your squeeze can't pull off that same move, too. Edited by d500neil 2014-01-19 6:57 PM | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | With help of Jarod from this site, you always need a helping hand when your starting one that has sat since 1972. I got it to fire up. Besides the exhaust or better stated, no exhaust it really sounded good. I was running some free gas mixed with boat motor oil and it smelled good. Everyone knows what next, more $$$ is needed and donations are accepted. LOL Updates to follow. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Here are a cpl of new pics. The gauges are showing what was going on after the oil change. The 2nd pic is one of my favorites. (001.JPG) (006.JPG) Attachments ---------------- 001.JPG (183KB - 128 downloads) 006.JPG (215KB - 125 downloads) | ||
SavoyPlaza |
| ||
Elite Veteran Posts: 1172 Location: Georgia | It's alive!!!! Well done, Dorsey! Pete | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | .......... Looks like it's just came out of the crypt and it ain't happy 'bout being buried !! ......... | ||
FIN ME |
| ||
Expert Posts: 2788 Location: USA - KY | I just love the grumpy look on these Dodges! I'm a fan of their "git otta my way" expression! "Grrrrrrr." | ||
big m |
| ||
Expert 5K+ Posts: 7808 Location: Williams California | Good to see your Dodge running!! ---John | ||
jimntempe |
| ||
Expert Posts: 2312 Location: Arizona | When King wrote Christine he should have cast a 59 Dodge as the lead.... | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | The 1960 Plymouth---especially with the grille guard---is REALLY the angriest FWDLK'er of all. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | Not only does it runs but it also DRIVES. I changed all hoses and thermostat and aired up the tires. I bolted the seat back in and sat behind the wheel dreaming of 1959. I reached over and turned the key and fired up the 361. She sat there rumbling with no muffler saying lets go daddy O. I pushed "D" and away we went with no brakes. I went 50ft and turned into my neighbors drive and pulled the E-Brake. My heart was pounding, SHE RAN!!! I tied a rope to my van and lowered it back down to my house with my neighbors help. No this isn't April Fools!!! (002.JPG) (003.JPG) Attachments ---------------- 002.JPG (209KB - 125 downloads) 003.JPG (212KB - 130 downloads) | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | ....."She'll drive; you'll need these." If you write a book about your experiences with 'him', you could call it "Christopher". | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | .......... EXCELLENT !!!............... with a heartbeat it's now back from the dead.......... Did you "pawn " off all those old magazines from the trunk ??? ........... | ||
The Chrysler Kid |
| ||
Expert Posts: 1384 Location: Ocala, Florida | "C'mon baby lets cruise" I love the it's I've photo she sure looks cool! | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | The last pic of its face. I know that a picture is worth a 1000 words. Its trying to tell me something. | ||
60 dart |
| ||
Expert 5K+ Posts: 8947 Location: WHEELING,WV.>>>HOME OF WWVA | greasydick been out of business for quite a while ------------------------------------------------later | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I worked on the brakes today and thought it needed a bath. | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I forgot to post pics. I think I just raised the property value of Wal Mart!!! LOL Edited by oldwood 2014-04-07 10:49 PM (002.JPG) (004.JPG) Attachments ---------------- 002.JPG (185KB - 123 downloads) 004.JPG (131KB - 118 downloads) | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | .......... I'm really liking your Dodge there Dorsey........... it's got some attitude !!!................ love it in that as found condition..................bet it turns some heads on the road !!!!...............can't hide the fact I love rat cars !! .......... Edited by VAN HELSING 2014-04-08 2:12 AM | ||
oldwood |
| ||
Expert Posts: 2905 Location: little rock, AR | I gave the front end a CLR bath this morning. Look at the 1st pic in this thread and the difference now. (002.JPG) Attachments ---------------- 002.JPG (176KB - 141 downloads) | ||
d500neil |
| ||
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil! Posts: 19146 Location: bishop, ca | I gotta book for you to read. You should name him Christopher. His cousin, Christine, had four doors, too; but she had a gear shift lever instead of push buttons. Does Chris hold a grudge? | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | That is really cool, love the whole look! | ||
Jump to page : 1 2 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |