The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 Plymouth Plaza business coupe
Jump to page : < 1 2 3 4 5 6 7 >
Now viewing page 7 [50 messages per page]		View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
The Chrysler Kid
Posted 2017-01-25 7:48 PM (#532339 - in reply to #532266)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida
RUSTORICHES - 2017-01-24 11:19 PM

The car is coming along great! Want to do one mine next? …….just kidding. There's nothing like Hands On Experience with these cars our appreciation only gets better and the car grows on you.I was also interested in the drive train question 57burb had as I've started to work on my 354 sort of [gathering some Old School Parts] I'm trying to track down a set of matching WCFB dual carbs primary# 2444s and secondary 2445s originals I think,what numbers are yours? One more question the air horn rings,what you tell me about them?


Thanks! They're actually early sixties 450CFMs off a Pontiac. They work well on the 331, the air cleaners fit, and they are relatively affordable! Air horn rings? Just the stock originals, not sure of the diameter.

Edited by The Chrysler Kid 2017-01-25 7:49 PM
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-01-25 7:52 PM (#532340 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		Lower grille and valences together. The rear seat board getting vinyl covered to blend in for the rear comparment. Probably will look similiar to the back seat delete max wedge cars. No evidence of a tray ever being there.



(20170125_184927-1328x747.jpg)



Attachments
----------------
Attachments 20170125_184927-1328x747.jpg (184KB - 530 downloads)
Top of the page Bottom of the page
58coupe
Posted 2017-01-26 10:29 AM (#532377 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 1770
10005001001002525
Location: Alaska		My 58 business coupe came to me with no interior. What was interesting was all the brackets for the rear seat had been torched off from the factory. I could tell this because of the original paint so my car must have been sold with no rear seat.
Top of the page Bottom of the page
Chrispy
Posted 2017-01-26 11:32 AM (#532384 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Extreme Veteran

Posts: 520
500
Location: Colorado Springs, Colorado		Can you take a picture of the clearance between your headers and the steering box? and post who made the headers?
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-01-31 7:11 PM (#532836 - in reply to #532384)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida
Chrispy - 2017-01-26 11:32 AM

Can you take a picture of the clearance between your headers and the steering box? and post who made the headers?


Forgot who made the headers got them at a swap meet. Photo:



(20170126_182050-597x1061.jpg)



Attachments
----------------
Attachments 20170126_182050-597x1061.jpg (122KB - 531 downloads)
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-01-31 7:12 PM (#532837 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		Pop and I's weekend progress. Headlamps wired, bumpers, and decklid.



(20170131_165443-1062x597.jpg)



(20170131_184446-1062x597.jpg)



Attachments
----------------
Attachments 20170131_165443-1062x597.jpg (128KB - 523 downloads)
Attachments 20170131_184446-1062x597.jpg (71KB - 548 downloads)
Top of the page Bottom of the page
SavoyPlaza
Posted 2017-02-01 6:30 AM (#532862 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Elite Veteran

Posts: 1172
10001002525
Location: Georgia		She's an absolute beast, Randy! Absolutely love the black.
Pete
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-02-03 8:30 PM (#533125 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		For the first time since 1964 she has propelled herself out of the barn under her own power. A great moment! Three years since this thread was first started the night she rolled in. A lot has changed. Still a ways to go but can finally see some light at the end of the tunnel.

Video: https://youtu.be/eiDRuxWHRMg

Edited by The Chrysler Kid 2017-02-03 8:48 PM




(20170203_182347-1062x597.jpg)



(20170203_184539-1062x597.jpg)



(20170203_190335-754x274.jpg)



Attachments
----------------
Attachments 20170203_182347-1062x597.jpg (90KB - 520 downloads)
Attachments 20170203_184539-1062x597.jpg (145KB - 563 downloads)
Attachments 20170203_190335-754x274.jpg (61KB - 519 downloads)
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-02-06 7:39 PM (#533376 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		Thanks Pete!.


Coming soon to Florida highways...

Edited by The Chrysler Kid 2017-02-06 7:40 PM




(20170206_185512-1062x597.jpg)



Attachments
----------------
Attachments 20170206_185512-1062x597.jpg (175KB - 528 downloads)
Top of the page Bottom of the page
RUSTORICHES
Posted 2017-02-06 11:46 PM (#533400 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Extreme Veteran

Posts: 494
100100100100252525
Location: Alberta		Great video and what an accomplishment. I noticed the FORD sign in the shop, do you think it's time to take that down now? Just kidding.Pop looks pretty happy and my hats off to you guys.

Edited by RUSTORICHES 2017-02-06 11:47 PM
Top of the page Bottom of the page
1961plymouthfury
Posted 2017-02-07 1:35 AM (#533405 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert

Posts: 2658
20005001002525
Location: Rogersville, Alabama		you need to get a 1957 Florida license plate and have it issued to the car
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-02-26 1:28 PM (#534737 - in reply to #533400)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida
RUSTORICHES - 2017-02-06 11:46 PM

Great video and what an accomplishment. I noticed the FORD sign in the shop, do you think it's time to take that down now? Just kidding.Pop looks pretty happy and my hats off to you guys.


Thank you, and don't worry, there is some Forward Look on the other side!



(20170226_133305-1062x597.jpg)



Attachments
----------------
Attachments 20170226_133305-1062x597.jpg (195KB - 515 downloads)
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-02-26 1:29 PM (#534738 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		Now onto the the interior. Sound deadening complete.



(20170216_183530-1062x597.jpg)



(20170226_122455-1062x597.jpg)



Attachments
----------------
Attachments 20170216_183530-1062x597.jpg (166KB - 518 downloads)
Attachments 20170226_122455-1062x597.jpg (267KB - 520 downloads)
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-04-07 7:57 PM (#537585 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		So finally got some time together tonight to tinker a little. Getting close now. Interior trim came back from powder coating. Headliner almost finished, got one door all complete, and finished out the dash trim. Also got the pattern off the original back seat delete panel. A bit thicker and larger than the usual cardboard that goes behind the seat. So lets see what we can do tomorrow!



(20170407_200424-1328x747.jpg)



(20170407_174226-1328x747.jpg)



(20170407_174216-1328x747.jpg)



(20170407_200354-1328x747.jpg)



Attachments
----------------
Attachments 20170407_200424-1328x747.jpg (124KB - 520 downloads)
Attachments 20170407_174226-1328x747.jpg (238KB - 512 downloads)
Attachments 20170407_174216-1328x747.jpg (239KB - 500 downloads)
Attachments 20170407_200354-1328x747.jpg (123KB - 497 downloads)
Top of the page Bottom of the page
Dana57
Posted 2017-04-07 9:43 PM (#537594 - in reply to #537585)
Subject: Re: 1957 Plymouth Plaza business coupe


Member

Posts: 30
25
I've been sayin it all along...FIRST CLASS. I love it!
Top of the page Bottom of the page
56D500boy
Posted 2017-04-07 11:11 PM (#537601 - in reply to #537585)
Subject: RE: 1957 Plymouth Plaza business coupe



Exner Expert 10K+

Posts: 10635
5000500050010025
Location: Lower Mainland BC		Looking good.

So what are you going to use to make a new behind the seat panel? I can get panels of 11 ply 1/2" thick baltic birch (very stable, non-warping) plywood up here in 5 ft x 5ft pieces. Might work for you.

Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-04-16 4:19 PM (#538203 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		Carpet in along with all door panels and front seat. Waiting on some custom fabbed pieces for the rear compartment.



(20170415_114025-1062x597.jpg)



Attachments
----------------
Attachments 20170415_114025-1062x597.jpg (192KB - 474 downloads)
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-04-26 6:39 PM (#538953 - in reply to #537601)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida
56D500boy - 2017-04-07 11:11 PM

Looking good.

So what are you going to use to make a new behind the seat panel? I can get panels of 11 ply 1/2" thick baltic birch (very stable, non-warping) plywood up here in 5 ft x 5ft pieces. Might work for you.




Thank you! Very similiar to what we used.
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-04-26 6:41 PM (#538954 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		So here is the rear compartment. Just about buttoned up. I believe it is similiar to how it looked on day one. Vinyl over panel and wheel arches. The glue residue was there originally. So I assume it was something similiar to the material used on the wagons. Almost done anyways. I need to find some props to put back there.



(20170423_130406-1328x747.jpg)



Attachments
----------------
Attachments 20170423_130406-1328x747.jpg (172KB - 503 downloads)
Top of the page Bottom of the page
RUSTORICHES
Posted 2017-04-26 9:36 PM (#538962 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Extreme Veteran

Posts: 494
100100100100252525
Location: Alberta		Is that a top loader 4spd. you have behind that Hemi?
Top of the page Bottom of the page
The Chrysler Kid
Posted 2017-10-08 7:22 PM (#549993 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		The final cut and buff was a few days ago, All the little stuff back on yesterday. So do the first time since she was parked 53 years ago Lucille turned into the open road. 3 years after we started this project. Certainly a long time coming. So I guess I can call her finished for now, though they never really are. A great father son project I will never forget, just before I leave to college. If anyone is going to Garlits on November 4th Lucille will be making her show debut. Stop by and say hi! This project would have been impossible without the great help of many people on this forum!



(20171008_163815-1008x567.jpg)



(20171007_192307-1008x567.jpg)



(20171007_192603-1008x567.jpg)



(20171008_162951-1008x567.jpg)



(20171008_163757-1008x567.jpg)



Attachments
----------------
Attachments 20171008_163815-1008x567.jpg (117KB - 487 downloads)
Attachments 20171007_192307-1008x567.jpg (158KB - 491 downloads)
Attachments 20171007_192603-1008x567.jpg (169KB - 472 downloads)
Attachments 20171008_162951-1008x567.jpg (240KB - 622 downloads)
Attachments 20171008_163757-1008x567.jpg (153KB - 485 downloads)
Top of the page Bottom of the page
1961plymouthfury
Posted 2017-10-09 2:34 AM (#550013 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert

Posts: 2658
20005001002525
Location: Rogersville, Alabama		Looks good
Top of the page Bottom of the page
moparsteve
Posted 2017-10-09 3:39 PM (#550041 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe


Elite Veteran

Posts: 1155
10001002525
Location: somerville mass		magnificent! for a fl plaza that hadant run under its own power since 1964! that is a street / drag car... take it to

the strip! back in 57 Plymouths they raced had to deal w a 3 on the tree or push buttons on the torqueflite. the shifter

is a nice touch! take it to shows!
Top of the page Bottom of the page
Powerflite
Posted 2017-10-09 3:56 PM (#550042 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Exner Expert 10K+

Posts: 10257
500050001001002525
Location: So. Cal		Nice job! I really like the dog dish, all black sedan look. It's like a government issue unmarked car like something an FBI agent would drive. Looks like you need to angle your rear bumper downward a bit though.
Top of the page Bottom of the page
Dana57
Posted 2017-10-09 4:15 PM (#550044 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Member

Posts: 30
25
That car is one of my favorite car's on the planet! WELL DONE! Those tires show well on there.
Top of the page Bottom of the page
mikes2nd
Posted 2017-10-09 4:58 PM (#550051 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert 5K+

Posts: 5153
50001002525
what torsion bars did you use? stock ones?
Top of the page Bottom of the page
Mike P
Posted 2017-10-30 8:46 AM (#551321 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Extreme Veteran

Posts: 585
500252525
Location: SE Arizona		Been a while since I’ve been on here.

Randy your car is beautiful. I don’t think you could have picked a better color or drivetrain for the car. The Business Coupe was a rare car and I really like that you kept the features that made it unique.


I’ve got a 57 Plaza I built to drive to Tulsa in 07 and am currently revisiting the car and making a few changes. I came across your video on you tube yesterday and found your build thread this morning. The similarities between our cars surprised me.


Mine started life as a Club Sedan with a 6 Cyl and powerflight. Fortunately it was virtually rust free so I didn’t have near the work you did on the body. I ended up doing 1 piece stationary rear windows (mostly because to me it makes the roof line visually less boxy looking).

I’m running a 56 354 Hemi and an A833 Overdrive 4 speed with a 9 ¼” rear end with 4.10 gears. Mine currently runs a Tri-Power (the reason I had to add the hood scoop). I have a 57 Dual Quad intake sitting on the bench right now that I need to build a couple carbs for. I mostly just want to see if there is going to be any difference in performance with it.


The best I’ve got for a build thread on mine is an old video I did about 10 years ….. the qualities not great but it pretty much shows what I did.


https://www.youtube.com/watch?v=eVwm8FDXitA


Like I said Randy yours is a GREAT car, you did nice work.

Here's a picture of mine


Edited by Mike P 2017-10-30 8:51 AM




(u 57 r 3.JPG)



Attachments
----------------
Attachments u 57 r 3.JPG (66KB - 463 downloads)
Top of the page Bottom of the page
Viper Guy
Posted 2017-10-30 10:14 PM (#551369 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 2007
2000
Location: Branson, MO		Sweeeeeeet! Love the '58 lower grille adapted to the '57 - nice touch! I bet it's a joy to drive!
Top of the page Bottom of the page
arizona mopar gold
Posted 2017-10-31 2:35 AM (#551377 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Extreme Veteran

Posts: 509
500
Location: Whetstone, Arizona		Great to see you back here Mike!!...
Top of the page Bottom of the page
58Jackie
Posted 2017-11-02 12:28 PM (#551501 - in reply to #549993)
Subject: RE: 1957 Plymouth Plaza business coupe



Veteran

Posts: 123
100
Location: Southern Idaho, USA
The Chrysler Kid - 2017-10-08 7:22 PM

The final cut and buff was a few days ago, All the little stuff back on yesterday. So do the first time since she was parked 53 years ago Lucille turned into the open road. 3 years after we started this project. Certainly a long time coming. So I guess I can call her finished for now, though they never really are. A great father son project I will never forget, just before I leave to college. If anyone is going to Garlits on November 4th Lucille will be making her show debut. Stop by and say hi! This project would have been impossible without the great help of many people on this forum!


Very pretty car! Looks really good in black.
Top of the page Bottom of the page
The Chrysler Kid
Posted 2018-05-23 11:15 PM (#563944 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		My father and I just appeared on Discovery channels "Sticker Shock". It was a really fun experience. They shipped the car to L.A. and arranged for us flights to appear with it. Really was a fun journey...and a pretty good appraisal for what I believe to be rarest/cleanest Plaza on the road.



(20180228_130330-1612x907.jpg)



(20180228_093044-1612x907.jpg)



(20180228_130430-1612x907.jpg)



(20180228_092638-1612x907.jpg)



(20180228_145252-1008x567.jpg)



(IMG_20180523_234204_003-1579x907.jpg)



Attachments
----------------
Attachments 20180228_130330-1612x907.jpg (391KB - 471 downloads)
Attachments 20180228_093044-1612x907.jpg (440KB - 426 downloads)
Attachments 20180228_130430-1612x907.jpg (320KB - 437 downloads)
Attachments 20180228_092638-1612x907.jpg (413KB - 445 downloads)
Attachments 20180228_145252-1008x567.jpg (153KB - 406 downloads)
Attachments IMG_20180523_234204_003-1579x907.jpg (331KB - 405 downloads)
Top of the page Bottom of the page
57burb
Posted 2018-05-24 10:01 AM (#563963 - in reply to #563944)
Subject: Re: 1957 Plymouth Plaza business coupe



Expert

Posts: 3974
200010005001001001001002525
Location: DFW, TX		Your Plaza turned out really slick man! It obviously impressed those guys on close inspection, so I know it's a knockout. Great job!

I cut the cable about five years ago, so I won't get a chance to see it on Discovery. I'll watch for it on youtube
Top of the page Bottom of the page
mikes2nd
Posted 2018-05-24 1:15 PM (#563970 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert 5K+

Posts: 5153
50001002525

when is the episode being shown? Next year? awesome car.

 

whoops my bad, it just aired



Edited by mikes2nd 2018-05-24 3:55 PM
Top of the page Bottom of the page
1961plymouthfury
Posted 2018-05-25 11:08 AM (#564012 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert

Posts: 2658
20005001002525
Location: Rogersville, Alabama		I looked in the pure gas web site and there are 5 fuel stations that have non ethanol fuel the highest octane is 90 in your area
Top of the page Bottom of the page
Woodruff
Posted 2020-02-01 7:23 AM (#593698 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Member

Posts: 10

Still love this car pal, can’t get it outa my head!
Top of the page Bottom of the page
Powerflite
Posted 2020-02-01 10:40 AM (#593705 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe



Exner Expert 10K+

Posts: 10257
500050001001002525
Location: So. Cal		I like the '59 dog dish caps you have on it. Better looking than the '57 versions IMO. There's something really cool about an all-black sedan with blackwalls & dog dishes that looks really great.
Top of the page Bottom of the page
1961plymouthfury
Posted 2020-02-14 1:17 PM (#594242 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Expert

Posts: 2658
20005001002525
Location: Rogersville, Alabama		Looks good but I would go crazy with out a radio in my car
Top of the page Bottom of the page
The Chrysler Kid
Posted 2020-02-14 5:23 PM (#594276 - in reply to #429375)
Subject: RE: 1957 Plymouth Plaza business coupe



Expert

Posts: 1385
1000100100100252525
Location: Ocala, Florida		A little update. Since completion in 2017 I have put about 5,000 trouble free miles on this car. Nothing but a few oil changes and general maintenance. She has ben a really good gal.

Edited by The Chrysler Kid 2020-02-14 5:24 PM




(Image 2-14-20 at 5.22 PM.jpg)



Attachments
----------------
Attachments Image 2-14-20 at 5.22 PM.jpg (33KB - 376 downloads)
Top of the page Bottom of the page
Woodruff
Posted 2020-02-19 9:14 PM (#594538 - in reply to #429375)
Subject: Re: 1957 Plymouth Plaza business coupe


Member

Posts: 10

Thanks for he update. Feel free to post pics anytime.
Top of the page Bottom of the page
Jump to page : < 1 2 3 4 5 6 7 >
Now viewing page 7 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)