Viewing a thread - 57 58 and 59? Inner sills

You are logged in as a guest. ( logon | register )

57 58 and 59? Inner sills Moderators: Ian, Rebels-59 Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Local Regions -> United Kingdom Region	Message format

springsweptwing

Posted 2015-07-12 11:30 AM (#484219)
Subject: 57 58 and 59? Inner sills

Elite Veteran

Posts: 1141
1000

Location: Blackpool, United Kingdom.

Inner sills/rockers 3 section made in USA , might be off use to someone?

(DSC_0331.JPG)

(DSC_0332.JPG)

(DSC_0333.JPG)

Attachments
----------------

DSC_0331.JPG (93KB - 786 downloads)
Attachments

DSC_0332.JPG (60KB - 756 downloads)
Attachments

DSC_0333.JPG (88KB - 736 downloads)

STOCKHEMI

Posted 2015-07-13 2:19 PM (#484393 - in reply to #484219)
Subject: RE: 57 58 and 59? Inner sills

Veteran

Posts: 152
100

hi paul what are you wanting for the rockers
and do you have any other parts
thanks graeme

springsweptwing

Posted 2015-07-15 11:31 AM (#484541 - in reply to #484219)
Subject: Re: 57 58 and 59? Inner sills

Elite Veteran

Posts: 1141
1000

Location: Blackpool, United Kingdom.

Hi graeme, if you want them just the cost of post, what other parts do you need? Paul.

STOCKHEMI

Posted 2015-07-15 6:20 PM (#484563 - in reply to #484541)
Subject: Re: 57 58 and 59? Inner sills

Veteran

Posts: 152
100

hi paul

im after a set of coupe doors if you know of any
I need passenger door really ,but I will buy a pair for spares
do you know of anyone with a set of 20/30 over 392 pistons
I am coming up your way in the next few weeks with work so maybe we can hook up

thanks graeme

Edited by STOCKHEMI 2015-07-15 6:23 PM

springsweptwing

Posted 2015-07-17 8:27 PM (#484717 - in reply to #484219)
Subject: Re: 57 58 and 59? Inner sills

Elite Veteran

Posts: 1141
1000

Location: Blackpool, United Kingdom.

hi graeme, pistons on Ebay,

http://www.ebay.co.uk/itm/252028515021?_trksid=p2055119.m1438.l2649...

no doors, give me a call when passing,

Paul.

BigBlockMopar

Posted 2015-07-18 4:13 AM (#484738 - in reply to #484219)
Subject: Re: 57 58 and 59? Inner sills

Expert

Posts: 3575
2000

Location: Netherlands

EGGE has made a set of cast .020" pistons for my 392 some years ago.
Can't remember the costs but they were certainly lower than a set of forged ones.

STOCKHEMI

Posted 2015-07-19 7:11 AM (#484813 - in reply to #484738)
Subject: Re: 57 58 and 59? Inner sills

Veteran

Posts: 152
100

hi thanks for the reply do you know compression ratio on these pistons ,
and do you have any rings to go with

I beleave these are possibly the same that are similar advertised on ebay ?
the compression would be the same on the height of the wrist pin

I will be intrested in having them
thanks graeme

STOCKHEMI

Posted 2015-07-19 7:13 AM (#484814 - in reply to #484717)
Subject: Re: 57 58 and 59? Inner sills

Veteran

Posts: 152
100

ok paul thanks will ring you
graeme

STOCKHEMI

Posted 2015-07-29 5:15 AM (#485520 - in reply to #484738)
Subject: Re: 57 58 and 59? Inner sills

Veteran

Posts: 152
100

could you give me a contact number to reach you on these items

BigBlockMopar

Posted 2015-07-29 3:07 PM (#485551 - in reply to #484219)
Subject: Re: 57 58 and 59? Inner sills

Expert

Posts: 3575
2000

Location: Netherlands

Don't remember the exact CR on the pistons but recall there were something like 9.5 to 10 : 1.

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)