The Forward Look Network | ||
| ||
1960 Dodge Phoenix fender chrome NOS Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> For Sale - PARTS | Message format |
68SuperBee |
| ||
New User Posts: 2 | I have two pieces of fender chrome for a 1960 Dodge Phoenix. They were marked NOS and look brand new even the studs and hardware. Just ask for close ups if you like. part number 186334 3 they have provisions where you could add a stud and I guess they would be one for each side. Otherwise I think these two are for the same side. Not quite sure why there is a difference in where they mount. $75 a piece shipped in the lower 48. Can check for other shipping places. The one complete set sold already. Pm on here or email hunterbee68@yahoo.com [IMG]http://i19.photobucket.com/albums/b158/hunterbee68/0B64B76D-AAAF-4A37-B971-E41488BD21E6_zpsl5of09n8.jpg[/IMG] [IMG]http://i19.photobucket.com/albums/b158/hunterbee68/CF5AC611-20F6-436B-A9A0-6F10860D09ED_zps0fuvvscs.jpg[/IMG] [IMG]http://i19.photobucket.com/albums/b158/hunterbee68/A23DF85C-D390-41BC-93E5-92333E6FEE84_zpsteiqukxv.jpg[/IMG] [IMG]http://i19.photobucket.com/albums/b158/hunterbee68/F8DC75F1-1A05-405D-8F3A-863F10F51D17_zpsbycy5jep.jpg[/IMG] Edited by 68SuperBee 2015-10-11 10:01 PM | ||
grant4405 |
| ||
Veteran Posts: 149 | do you know if these are the same as on a matador?? | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | I believe that if they have been cast with an optional boss for another stud they are for the matador I bought a pair of nos ones and one had the 3 bosses and 1 only had 2, the one with the 3 had studs in 2 0f the bosses, but the spacing was wrong for my phoenix, I had to drill out the third boss to accept a stud and grind the other back down to clear the ridge in the panel Because of the big plate thing on the matador, the ridge in the fender doesnt come into play? The one in the picture with the bolts close together is for the phoenix/dart line, as I dont have a senior model here, I assume the other 3 are for those The Matador one would have been rocking horse poo years ago, but because the dart line are more common, I would think the dart ones would be harder to get these days Cant be to many more nos ones floating around, so if you want these, best snap them up The modification to fit the matador ones to a dart was a bit of a pain, but not enough to make you not want to do it One thing is, if you have a matador, then buy these as the dart ones dont have the boss and cant be modified to suit Edited by ttotired 2015-10-17 8:49 PM (dodge fender spears.jpg) Attachments ---------------- dodge fender spears.jpg (158KB - 276 downloads) | ||
GLanzino |
| ||
New User Posts: 4 | Are these still available? I know its a long shot, but if it is I am extremely interested!! Thanks!! | ||
geoffs60 |
| ||
Veteran Posts: 165 Location: christchurch New Zealand | PM sent thanks.Geoff | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | I will have to go and see if I still have a pair. The ones pictured were not mine, they were on ebay in 2015. I wont have NOS ones if I do still have them. I know I have a couple, but condition is the issue. The NOS ones I bought at the time went on the car I was building | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |