The Forward Look Network | ||
| ||
Headliner plastic retainer strips group buy 57-65 2dr HT and Wagons Jump to page : 1 2 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion | Message format |
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | I am Mike, I have been here almost 3 years now(I have a 58 plymouth, 58 Regal Lancer and a 57 Royal), I live in North East Ohio and I would like to offer a group buy for the group(i will be contacting the Christine folks also). I am working with a local company that has 50 years of experience(about 45 employees), quality is guaranteed. If you don't like it ill refund. Each Plymouth 2 dr ht strip is 50$ usd, 45$ for the shorter wagon/Dodge 2 dr ht versions unchromed flexible hard clear plastic. Ill place the order after 50 spots or 6-8 weeks(if we reach at least half full), prices will increase once this is over. Expected ship time is two months after I close the group buy and place the order. Factory repops, excellent quality, hard clear plastic, typical lengths and custom if you want, each piece will be slightly oversize(maybe a half inch on each end) Obviously I can ship overseas and will try to make that as painless as possible. If you have a local shop in EU, I can ship multiple orders to a single point. Just reply below with your name in the list. Reverse Chroming cost to be announced(expected 20$-30 range). If enough people I can do a "color" cream matched version. obviously it costs alot more to do another run(setup costs and color matching). I was told I can get a glow in the dark version for you Christine fans :). The chrome paint is flexible enough to not bend. I am checking on clear coating cost also. Deposits: depending upon response I may not do deposits. http://www.forwardlook.net/forums/forums/thread-view.asp?tid=59388&posts=16&start=1 1. Soiouz (2 strips, reverse chromed, 2 dr ht plymouth) 2. Mstrug (2 strips, reverse chromed 1958 Plymouth 2 door hardtop) 3. Fury (4 strips, reverse chromed, 58 plymouth 2dr ht) NZ 4. Andy1974 (6 strips reverse chromed, 58 Plymouth 2dr ht) Germany 5. ply57nz (2 strips reverse chromes, 58 plymouth 2dr ht) NZ 6. cbrayinga (2 strips reverse chromed, 58 plymouth 2 dr ht) Edited by mikes2nd 2015-11-20 6:48 AM | ||
mstrug |
| ||
Expert 5K+ Posts: 6500 Location: Newark, Texas (Fort Worth) | Marc S: 2 strips reverse chromed 1958 Plymouth 2 door hardtop. | ||
old mopar guy |
| ||
Expert Posts: 1508 Location: new york | If they fit a 4door hardtop I will take a set! Thanks Victor. | ||
FURY |
| ||
Elite Veteran Posts: 1049 Location: Auckland, New Zealand. | 4 strips for 57 Plymouth 2 door hardtop, reverse chromed. Glenn. | ||
Andy1974 |
| ||
Regular Posts: 90 Location: Germany | 6 strips, reverse chromed, for 3 owners of 58 Plymouth 2D HTs in Germany please. Andy Edited by Andy1974 2015-11-20 3:14 AM | ||
ply57nz |
| ||
Regular Posts: 94 Location: New Zealand | 2 strips for a 57 Plymouth Hardtop reverse chromed please. Cheers Norm | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | old mopar guy - 2015-11-19 9:32 PM If they fit a 4door hardtop I will take a set! Thanks Victor.
How many does the 4 door ht use? 4 strips? | ||
cbrayinga |
| ||
Veteran Posts: 295 Location: Tallapoosa, GA | Sign me up for 2 strips, reverse chromed, 57 Plymouth 2dr HT. | ||
soiouz |
| ||
Expert Posts: 3480 Location: Montreal, Canada | mikes2nd - 2015-11-20 6:21 AM old mopar guy - 2015-11-19 9:32 PM If they fit a 4door hardtop I will take a set! Thanks Victor.
How many does the 4 door ht use? 4 strips? Plymouth 4 door hdtp uses two strips, only shorter than two door hdtp | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | soiouz - 2015-11-20 6:49 AM mikes2nd - 2015-11-20 6:21 AM Plymouth 4 door hdtp uses two strips, only shorter than two door hdtpold mopar guy - 2015-11-19 9:32 PM If they fit a 4door hardtop I will take a set! Thanks Victor.
How many does the 4 door ht use? 4 strips? So that would be 2 strips, unchromed(since they will be painted), 4 dr ht length(tbd) PS when i mean spots i mean "a set of strips". So we are at 10 of 50 spots filled already. Edited by mikes2nd 2015-11-20 9:57 AM | ||
57DODGECONV |
| ||
Elite Veteran Posts: 854 | 4 Strips for 2 57/58 Plymouth 2 dr ht reverse chrome . Thankyou . | ||
Finsinthemirror |
| ||
Elite Veteran Posts: 1116 Location: CA | I'm in for 6 reverse chrome strips 2 Dr HT. Thanks! | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | I'd be up for four of the reverse chromed 2-door hardtop ones. ---John | ||
57plybel |
| ||
Extreme Veteran Posts: 594 Location: Melbourne, Australia | I'll put my hand up for 4 strips (2 cars) 57 Plym 2 dr hardtop , reverse chromed please Mike... (Melbourne, Australia)
Colin | ||
1960ny |
| ||
Extreme Veteran Posts: 467 Location: Sweden | 7 strips reversed chrome for my -60 Wagon Jorgen | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | 7. 57DODGECONV 4 Strips for 2 57/58 Plymouth 2 dr ht reverse chrome 8. Finsinthemirror 6 reverse chrome strips 2 Dr HT 9. big m four of the reverse chromed 2-door hardtop ones. 10. 57plybel 4 strips (2 cars) 57 Plym 2 dr hardtop , reverse chromed 11. 1960ny 7 strips reversed chrome for my -60 Wagon 22 of 50 spots filled | ||
Mike McCandless |
| ||
Expert Posts: 1886 | I won't be home till Monday but will order for my 60 Plymouth wagon | ||
mstrug |
| ||
Expert 5K+ Posts: 6500 Location: Newark, Texas (Fort Worth) | will they bend this tightly? (57dodgeroofribsinterior4.jpg) Attachments ---------------- 57dodgeroofribsinterior4.jpg (75KB - 200 downloads) | ||
cameldiver |
| ||
Member Posts: 8 Location: tallassee,tn | I'll Take a set for my 58 fury | ||
goldfin58 |
| ||
Regular Posts: 80 Location: Mid Atlantic | Put me down for two reverse chrome strips for my 58 Fury. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | mstrug - 2015-11-21 8:40 PM will they bend this tightly? Yep! I talked to the engineer and he said its just an adjustment to the mix. He had me bring in my overhead sheetmetal rails from both cars. I am going to double check on the chrome paint on the wagons/dodges. He said its flexible enough to bend.
Edited by mikes2nd 2015-11-22 10:34 AM | ||
jpmopar |
| ||
Extreme Veteran Posts: 466 Location: Southwest VA | Put me down for two chrome reverse strips for my '61 Fury 4-door hardtop. Jim | ||
ToMopar |
| ||
Elite Veteran Posts: 1159 Location: D-70199 Heslach | Hi Mike 6 reverse chrome for a 57 Flite Wagon | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Hi Mike, 3 strips please reverse chromed 58 Dodge , Thanks Paul. | ||
JohnD |
| ||
Member Posts: 36 Location: New Jersey | Hi Mike Put me down for 2 sets of reverse chromed for '58 Fury. Thanks -John | ||
jpmopar |
| ||
Extreme Veteran Posts: 466 Location: Southwest VA | Hey Mike, Any updates on the headliner strips? Thanks Jim | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | Still pending the trigger, I am close. I talk to them early next week. Reverse chroming is 20$ a set. 31 "sets" approximately now. I will need to confirm lengths, like I said I will make them a inch longer as needed to handle slight size differences in car. I will have them cut the 2dr ht lengths first. I will update the list and confirm. I may still need to collect deposit also, really depends on how much I have made(setup costs and footage). | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | I will be updating the list. Has anyone used the ebay shipping? How is the cost for you overseas? I simply spent the money to send to a local ebay shipping center? What was the cost for them to get the item to you? I may move the overseas people to a ebay auctions if it saves you guys big money. | ||
Andy1974 |
| ||
Regular Posts: 90 Location: Germany | Mike, I never heard of ebay shipping centers. So I have no idea. Maybe someone else in Europe can tell something. What I know is that boxes longer 50" get extremely expensive via airfreight, at least Germany -> USA. So it would be good if the strips are bendable. If airfreight is too expensive I would recommend sending it to a container service. In that case, the sender has to send the box to an interim storage address. | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Mike , be carefull on those shipping center's, I sold a bike here in UK that was going out of country , ebay calculated the shipping and it was sent to there shipping centre, guy never received bike as shipping costs exceeded eBay calculations , they refunded buyer I got paid for bike and as far as I know it's still at there shipping centre? Might be easier to package them in a large flat box and bend them in a arc, I do have a shipping address in Florida if easier and they would come into UK in container that could solve problems of anyone needing them in the UK, Paul. | ||
jpmopar |
| ||
Extreme Veteran Posts: 466 Location: Southwest VA | Mike, Besides the two reverse chromed strips I requested for the '61 Fury 4-door hardtop, I would also like to purchase a set of reverse chromed strips for a '59 Fury 4-door hardtop. The '61 strips run side to side and the '59 strips run back to front. Thanks, Jim | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | can you PM me the specifics: Make, model, Year, body style and lengths/quantity. | ||
Paul Hettick |
| ||
Elite Veteran Posts: 705 Location: California | Just looked at a rambler marlin for a friend. It uses the same reverse chrome strips as the mopars. They run front to back and are about 10 ft long. If there's a marlin site you may get some customers there as well. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | Holidays hit.. no real movement. I have the dual antenna being molded right now so it might go first. | ||
59ride |
| ||
Veteran Posts: 269 Location: Chesterfield, Virginia | Mike, I have a 59 Desoto Firesweep.2 dr ht. Will the strips fit that model ? thanks. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | Dunno, are yours the plastic ones? I though desotos had stainless? Just found out I can change the "cut length" at will which is great. I was worried about paying another setup fee. I am waiting to hear about some money coming in and this will fire up after that. I hope to get this kicked off in a month. I want to double confirm the "bend". The person said "we cant roll these"... and I was like what? Engineer is confirming the amount of flex. I want them pretty flexible as I don't want to imagine the price of shipping long tubes overseas. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | uhg of course the stupid guy shows up with the rear dual antenna molds... those are going to happen first now. Expect a month delay. | ||
plymouhfan |
| ||
Member Posts: 40 Location: norway | Hi Mike I`ll take 2 strips reversed chrome for my 57 ply 4 door hardtop. Thanks Stian | ||
soiouz |
| ||
Expert Posts: 3480 Location: Montreal, Canada | mikes2nd - 2016-01-21 4:24 PM uhg of course the stupid guy shows up with the rear dual antenna molds... those are going to happen first now. Expect a month delay. Well, maybe the canuck dollar will regain some value against the USD in that delay, so no problem for me! | ||
cbrayinga |
| ||
Veteran Posts: 295 Location: Tallapoosa, GA | Take your time, Mike. I'm in no hurry! | ||
villegas |
| ||
New User Posts: 1 | Hello mike i have a 1959 plymouth belvedere 4 door ht do you have 2 headliner plastic retainer strip reverse chrome? let me know please my headliner is garbage and i need the strips thank!! fuchoant@hotmail.com | ||
Knighty |
| ||
Extreme Veteran Posts: 444 Location: Victoria, AUSTRALIA | HI Mike put me down for 2 reverse chrome strips for 58 2 door hardtop they can go with Col Prins order - and I will pickup from Rusty's House - Melbourne Australia! thanks tim | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | still pending, I think I can pull the trigger in 2 months(as long as money keeps coming in). I really don't want to take deposits but it would make this go faster. I am in talks with another guy to make the fiberboard with the perforation. I should be able to make the ones with patterns. simply glue the paper and perforate it... | ||
ToMopar |
| ||
Elite Veteran Posts: 1159 Location: D-70199 Heslach | Mike, in case I can speed up the process I need an paypal nick to send the deposit. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | I will be doing this(within two months for sure now). I just wanted to make sure I covered the tooling cost and the antenna tooling cost. I will take deposits once I pay for the tooling. This will affect priority on delivery. | ||
dartphoenix |
| ||
New User Posts: 3 Location: Sydney,Australia | l've come in a bit late on this, any updates? l'm in need of two reverse chrome for my '61 Phoenix hardtop. | ||
58chook |
| ||
Member Posts: 8 Location: Mount Gambier, South Australia | I am interested in 2 sets of strips (1 set reverse chrome, 1 set plain) to suit a 1958 Plymouth 4 door hardtop. Thankyou. Neil. | ||
mstrug |
| ||
Expert 5K+ Posts: 6500 Location: Newark, Texas (Fort Worth) | I got the 'v' mike! Nice! Marc. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | okay, priorities, priorities... In order to speed this up... I have been held back by other projects and I want to keep a buffer(stupid dual antenna molder has me hanging). I will take deposits starting now. I cannot eat the paypal fees as I am probably going to lose a little bit on this anyways. So you can pay by check or if you paypal you must gift it. Obviously I will have product afterwards to sell and then potentially maybe profit. So contact me, first come, first serve. I am only accepting deposits on 2 door hard top Plymouth size reverse chromed and non chromed right now. I will not accept any new orders. Only the people who replied above or contacted my through PM will get the group buy price. 50$ a strip + 20$ for reverse chroming+clear. add shipping of 15$ to start. The balance will be adjusted once they are ready to ship. Total for a set, chromed is 135$, 115$ non chromed. I will determine 4 door ht, 2 door(4 ribs opposite direction) and wagon prices soon. I have to check lengths and setup fees on different sizing from the manufacturer. Should be 45$ as I stated before a rib, maybe 40$. This will speed this up by 2-3 months. Remember this is money back guaranteed. I have seen the quality this shop produced, its not cheap but the quality is top notch. PM me your order, how you want to pay and I will send you deposit info. Once I hit 20 deposits I will write the check for the tooling to get started. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | okay not really enough deposits coming in. We will just wait the 3-4 more months. You guys have waited this long I guess. | ||
Jump to page : 1 2 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |