The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

what is the difference in P.B set up between Chrysler& Plymouth?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Brakes, Wheels and TiresMessage format
 
udoittwo
Posted 2018-05-29 10:09 AM (#564160)
Subject: what is the difference in P.B set up between Chrysler& Plymouth?



Elite Veteran

Posts: 1191
1000100252525
Location: Valley Forge, Pa.
I have read here of someone putting a 7" aftermarket P.B. set up on and it didn't work so well and was thinking of going to an 8" set up but I don't recall anything more about it. Did the 8" work?

I don't have a Chrysler and don't know the difference but I see the 8" kits are available for a 60 Chryslers but will not fit a 60 Plymouth. Is it a size issue? Won't it fit under the hood?
They look like they use the same mounting to the firewall. These kits will work on later 60s MOPARs. I am using a MC for a Plymouth Cuda. What is the difference? Is it the rod or?

Can these kits work as is or can they be modified? If this subject has come up before, what would I look for as a subject for an old thread?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)