The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

need P.B. push rod end and P.S. cap
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
udoittwo
Posted 2018-08-26 10:06 AM (#569032)
Subject: need P.B. push rod end and P.S. cap



Elite Veteran

Posts: 1184
1000100252525
Location: Valley Forge, Pa.
My car has a homemade brake push rod. I bought kit to convert to hydroboost P.B.s. It has a threaded rod coming out if the hydroboost. Without measuring, I believe it may be an 11/32 fine thread. This kit was made for my 1960 Plymouth so I am guessing it is the correct threaded rod size? Anyway, I am looking for the nut and end piece that connects to the pedal. Also MAY looking for a cap for my P. steering if its not too much. They come up on ebay every once in a while and it is not an emergency need.

Thanks for any help,
Karl.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)