The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Astradome lighting
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
1coolbanana
Posted 2018-09-20 7:01 PM (#570467)
Subject: Astradome lighting


Veteran

Posts: 204
100100
Location: Sydney
Hey all
My astradome back lighting seems to all work but the needles do not glow so they cant be seen.
Any clues as to why that would be.


Top of the page Bottom of the page
56300B
Posted 2018-09-20 8:21 PM (#570475 - in reply to #570467)
Subject: RE: Astrodome lighting



Extreme Veteran

Posts: 453
1001001001002525
Location: The Great Northwest
Generally speaking, each needle has a hair thin wire running from the base of the needle to an electrical source. The wires tend to break with age and leave the needles powerless and dark. Someone may have painted the needles with opaque paint so the glow doesn't come through leaving them 'dark'. Just a couple of possibilities……………..


Edited by 56300B 2018-09-20 8:22 PM
Top of the page Bottom of the page
1coolbanana
Posted 2018-09-20 9:15 PM (#570479 - in reply to #570467)
Subject: Re: Astrodome lighting


Veteran

Posts: 204
100100
Location: Sydney
Bummer...... Neither possibility sounds too good
Top of the page Bottom of the page
wizard
Posted 2018-09-21 12:23 AM (#570488 - in reply to #570467)
Subject: Re: Astrodome lighting



Board Moderator & Exner Expert 10K+

Posts: 11701
500050001000500100100
Location: Southern Sweden - Sturkö island
The Lintz thread are broken - I can fix it but there will be shipping costs and some time
Top of the page Bottom of the page
1coolbanana
Posted 2018-09-21 5:45 AM (#570493 - in reply to #570488)
Subject: Re: Astrodome lighting


Veteran

Posts: 204
100100
Location: Sydney
wizard - 2018-09-21 3:23 PM

The Lintz thread are broken - I can fix it but there will be shipping costs and some time


Thanks so much for the offer.
Might have to take you up on that sometime :-)
Cheers

Edited by 1coolbanana 2018-09-21 5:46 AM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)