The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

honing cylinders with gunk penetrating oil
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
60 dart
Posted 2018-10-10 11:51 PM (#571474)
Subject: honing cylinders with gunk penetrating oil



Expert 5K+

Posts: 8444
50002000100010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA
should never be done and i learned the hard way. i use to use 30 weight oil but thought i'd be a smart ass and use the little penetrating gunk i had left . what a huge
mistake . won't come off with a rag or brushing but did after over an hour with my pressure washer and after i hit every square MM . simply disgusted i am with myself ---------------------------------later
Top of the page Bottom of the page
wizard
Posted 2018-10-11 12:16 AM (#571479 - in reply to #571474)
Subject: Re: honing cylinders with gunk penetrating oil



Board Moderator & Exner Expert 10K+

Posts: 11542
50005000100050025
Location: Southern Sweden - Sturkö island
Alcohol cleans out very well. I use 92% alcohol for to clean out wheel cylinders after honing.
Top of the page Bottom of the page
60 dart
Posted 2018-10-11 3:24 PM (#571522 - in reply to #571474)
Subject: Re: honing cylinders with gunk penetrating oil



Expert 5K+

Posts: 8444
50002000100010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA
wiz , i use 90% and it wouldn't touch it . i even used wheel cleaner but no go , power washing was the only alternative i had left----------------------------------------------------------later
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)