The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

updating a '57 Dodge 2-door wagon
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
Darryl T
Posted 2019-04-02 12:50 AM (#580276)
Subject: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
I have posted some pics under "Members rides" but thought maybe I should start a thread here as it is going to be considerably modified. I purchased an '06 Chrysler 300C at an insurance auction as a donor. So far I have installed the independent rearend, the 14" front disc brakes (on the '57 spindles), and just finished making the transmission and motor mounts for the Gen III hemi and 5-speed automatic. The trans crossmember was installed backwards, notched to clear, and reinforced. I was going to use Trans-Dapt motor mounts, but they have what I consider a design flaw - they need to both be offset 5/8" to the right in order to compensate for the block bolts being 1 1/4" farther back on the RH side. Since they refused to acknowledge the problem or make me a modified set, I just copied their design with the appropriate modification. The frame mounts are gusseted on the rear which doesn't show in the photo. I installed a MoPar rear-sump oil pan in order to clear the Chrysler 300 AWD power rack and pinion which is the next task. It will mount on a removable cradle to make engine removal easier as things will be rather tight down there. The stock Chrysler exhaust manifolds appear to line up nicely, pointing between the frame and torsion bars. I plan to use the Chrysler master cylinder assembly, complete with power adjustable brake and throttle positioning. I originally had planned to use the factory navigation and 6-CD player, but not sure if they will work without a computer tie-in.

It's a slow process as I work alone and am nearing 70, but being retired really helps.



Edited by Darryl T 2019-04-02 1:02 AM




(4-1-19 001-1.JPG)



(4-1-19 009-1.JPG)



(4-1-19 013-1.JPG)



(4-1-19 015-1.JPG)



(4-1-19 021-1.JPG)



(4-1-19 023-1.JPG)



(028-3.JPG)



Attachments
----------------
Attachments 4-1-19 001-1.JPG (186KB - 88 downloads)
Attachments 4-1-19 009-1.JPG (194KB - 83 downloads)
Attachments 4-1-19 013-1.JPG (184KB - 85 downloads)
Attachments 4-1-19 015-1.JPG (174KB - 88 downloads)
Attachments 4-1-19 021-1.JPG (189KB - 82 downloads)
Attachments 4-1-19 023-1.JPG (206KB - 95 downloads)
Attachments 028-3.JPG (185KB - 95 downloads)
Top of the page Bottom of the page
60 Imp
Posted 2019-04-02 8:01 AM (#580280 - in reply to #580276)
Subject: RE: updating a '57 Dodge 2-door wagon


200010001001001002525
Location: North Australia
Good on ya mate. Some neat fabrication going on there. I will be watching for your updates, you do some nice work. I liked looking at your Convertible job too. You are a true enthusiast! I am going to take a guess, you are a tradesman? Steve

Edited by 60 Imp 2019-04-02 8:02 AM
Top of the page Bottom of the page
57chizler
Posted 2019-04-02 1:37 PM (#580296 - in reply to #580276)
Subject: RE: updating a '57 Dodge 2-door wagon



Expert

Posts: 3335
2000100010010010025
Location: NorCal
Nice work. How is the oil filter clearance? I've heard this a problem with Gen III Hemi swaps.
Top of the page Bottom of the page
Darryl T
Posted 2019-04-02 1:58 PM (#580298 - in reply to #580280)
Subject: RE: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
60 Imp - 2019-04-02 I am going to take a guess, you are a tradesman? Steve

Not really. 40 years behind a desk as an environmental engineer. But a hot rodder since I was 14, having hand built a lot of cars from 32 Fords to DeLoreans.
Top of the page Bottom of the page
Darryl T
Posted 2019-04-02 2:19 PM (#580300 - in reply to #580296)
Subject: RE: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
57chizler - 2019-04-02 10:37 AM

How is the oil filter clearance? I've heard this a problem with Gen III Hemi swaps.

I have a MoPar angled filter adapter. I haven't tried it yet but it is supposed to be the cure.
Top of the page Bottom of the page
56D500boy
Posted 2019-04-02 2:44 PM (#580301 - in reply to #580298)
Subject: RE: updating a '57 Dodge 2-door wagon



Expert 5K+

Posts: 5750
50005001001002525
Location: Lower Mainland BC
Darryl T - 2019-04-02 10:58 AM

Not really. 40 years behind a desk as an environmental engineer. But a hot rodder since I was 14, having hand built a lot of cars from 32 Fords to DeLoreans.



Hello. I was an environmental engineer for 38 years. Retired in 2010. Worked for Associated Engineering for the last 20 years 1990-2010. Mostly solid waste and biosolids management. Worked with US people from Brown and Caldwell, CH2M Hill and Tetra Tech on various projects.

Top of the page Bottom of the page
bbdakota
Posted 2019-04-05 7:03 AM (#580404 - in reply to #580276)
Subject: Re: updating a '57 Dodge 2-door wagon


Member

Posts: 33
25
I like! Looking fwd to updates on this build. I'm putting a 5.7/NAG1 in a 58 plymouth, it's interesting to see how others concurred obstacles I've run across. I like the rearend idea, wish I'd thought to do that to mine. Good luck!
Top of the page Bottom of the page
Darryl T
Posted 2019-12-12 3:47 PM (#591501 - in reply to #580276)
Subject: RE: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
Darryl T - 2019-04-01 9:50 PM

I installed a MoPar rear-sump oil pan in order to clear the Chrysler 300 AWD power rack and pinion which is the next task. It will mount on a removable cradle to make engine removal easier as things will be rather tight down there.


I thought for posterity I should update that statement. The rear sump oil pan did not work out, so I went with a Moroso mid-sump pan. The rack required the fabrication of shorter steering arms, out of 1" square stock, due to its shorter travel and the stock arms hitting the 18" wheels/tires.
Top of the page Bottom of the page
Darryl T
Posted 2020-03-05 2:40 PM (#595272 - in reply to #580276)
Subject: Re: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
After selling this project in August and re-purchasing it last month, it is now in a body shop getting the rockers and lower rear quarters replaced, as well as getting the firewall, hood, and tailgate "cleaned up" with all extraneous holes filled. Plans as of now include upgrading the 5.7 to a 6.4 SRT8 engine, and hopefully retaining the pushbutton shift. Stay tuned....
Top of the page Bottom of the page
Coronet_Jeff
Posted 2020-03-12 6:40 AM (#595512 - in reply to #580276)
Subject: Re: updating a '57 Dodge 2-door wagon


Member

Posts: 48
25
What are your plans on retaining the push button shifter?

My plan is to use an A-518(46RH) with the push button cable adapter from AandA transmissions. I have all of the parts, haven't mocked it up yet, but I'm getting close.

Also, I found that the Mopar Performance Hemi wiring harness requires a momentary starter switch, which is exactly what our Neutral push button does, so it should be easy to hook that up.
Top of the page Bottom of the page
Darryl T
Posted 2020-03-12 2:23 PM (#595522 - in reply to #580276)
Subject: Re: updating a '57 Dodge 2-door wagon



Veteran

Posts: 269
1001002525
Location: McCleary WA
Current plan is to use the system from Powertrain Control Solutions, which is specifically designed for the Chrysler NAG1 transmission and others. The button pad will replace the original pushbutton assembly. While not what you are probably looking for, it is a street rod and not a restoration so I'm not hung up on a totally original look. See powertraincontrolsolutions.com. I will probably use a modern pushbutton starter switch, or use an original key switch from a manual trans '57 Dodge which I believe includes a start position. The idea is a tasteful integration of original design with modern function and electronics.
Top of the page Bottom of the page
Powerflite
Posted 2020-03-12 4:48 PM (#595529 - in reply to #580276)
Subject: Re: updating a '57 Dodge 2-door wagon



Expert 5K+

Posts: 6277
50001000100100252525
Location: So. California
You could mount that button pad behind the original push buttons to have them actuate the button pad. As long as the change in position isn't too convoluted, you should be able to make that work. That's what I would probably do.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)