The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

60 Windsor drivetrain movement
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
Posted 2019-06-07 4:59 PM (#583077)
Subject: 60 Windsor drivetrain movement

Extreme Veteran

Posts: 435
Location: Park Hills, KY
All, I have my car at a local restoration shop for some repairs. I visited today while the car was on the lift. I was prepared to replace the ball and trunnion and the rear u joint since I believed them to be the culprit causing my occasional low speed drive train shudder. I had already replaced the transmission mount rubber and bushing. However, the front and rear u joint are solid as a rock. That said, I can grab the prop shaft and shake the entire motor and transmission. This is obviously the issue, but how much up and down play should be in the trans mount spring? It seems excessive to me and the mechanic who was going over it with me.

I’m happy that my joints are in decent shape. But irritated to find yet another gremlin to figure out.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)