![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> The Exhaust Pipe - Modification & Performance | Message format |
lonesome mopar![]() |
| ||
Extreme Veteran Posts: 398 ![]() ![]() ![]() ![]() ![]() ![]() Location: Milano, Italy | Hi gang ! I am sure some among you could tell me if this kit could fit my 1958 Plymouth belvedere 4DRHT....
https://www.ebay.com/itm/Mopar-Chrysler-Plymouth-A-body-front-power-disc-brake-conversion-5-on-4-chrome/332347810339?epid=1154173226&hash=item4d61792223:g:sAgAAOSwetRZle8D | ||
| |||
56D500boy![]() |
| ||
Exner Expert 10K+ Posts: 10387 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Lower Mainland BC | lonesome mopar - 2019-08-22 9:36 AM Hi gang! I am sure some among you could tell me if this kit could fit my 1958 Plymouth belvedere 4DRHT.... https://www.ebay.com/itm/Mopar-Chrysler-Plymouth-A-body-front-power-... And with the stroke of the ENTER key (AND removal of the unnecessary html formatting BS, I've magically made that link ALIVE! I'm pretty sure that it is not for you for several reasons. "Mopar Chrysler Plymouth A body front power disc brake conversion 5 on 4 chrome" is not a 58 Plymouth. Edited by 56D500boy 2019-08-22 1:21 PM | ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10081 ![]() ![]() ![]() ![]() ![]() Location: So. Cal | Wrong bolt pattern and wrong geometry. Get one from: https://scarebird.com/index.php?route=product/product&path=64&produc... (15" wheels required) or http://www.aajbrakes.com (stock 14" wheels) Willwood is another higher end option (15" wheels required) Edited by Powerflite 2019-08-22 2:43 PM | ||
| |||
BlueGhost![]() |
| ||
Regular Posts: 58 ![]() ![]() Location: League City, TX | Powerflite - 2019-08-22 1:40 PM Wrong bolt pattern and wrong geometry. Get one from: https://scarebird.com/index.php?route=product/product&path=64&produc... (15" wheels required) or http://www.aajbrakes.com (stock 14" wheels) Willwood is another higher end option (15" wheels required) It looks like Scarebird has changed the rotors and calipers to ones that work with 14 inch wheels. We use 1977 Cordoba rotors (11-3/4", same wheel bolt pattern and pilot size) and 1985-89 Cadillac DeVille FWD front calipers. This kit will clear your OEM 14" rims. | ||
| |||
Mopar1![]() |
| ||
Expert Posts: 3085 ![]() ![]() ![]() ![]() ![]() Location: N.W. Fla. | On my '60 Plym I used '77 NYer spindles & a late '70s Ranchero 9" axle. Had ordered Aspen/Volare spindles from a guy, they wouldn't fit, but I'm not sure if he sent wrong ones or what, they were supposed to fit. | ||
| |||
lonesome mopar![]() |
| ||
Extreme Veteran Posts: 398 ![]() ![]() ![]() ![]() ![]() ![]() Location: Milano, Italy | Thanks a lot Dave! I always mess up with font size and links color. I tried to make the the fonts bigger because FWL fonts are too small for my weary eyes....Thank you very much for your help !!! Thanks all the friiends for the hints. Unfortunately down here it is not easy to access all the parts suggested... I will check the link suggested. Thanks to everybody !!!! | ||
| |||
wayfarer![]() |
| ||
Elite Veteran Posts: 906 ![]() ![]() ![]() ![]() ![]() Location: Peoples Republic of Oregon | Also check with www.rustyhope.com | ||
| |||
lonesome mopar![]() |
| ||
Extreme Veteran Posts: 398 ![]() ![]() ![]() ![]() ![]() ![]() Location: Milano, Italy | thank you wayfarer !! this site is complete and very instructive. Thumbs up ! | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |