The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1955 1956 clutch rod needed
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
tailfins
Posted 2020-03-20 8:43 PM (#595809)
Subject: 1955 1956 clutch rod needed


Expert

Posts: 1582
1000500252525
Location: calif
missing part that mates up to clutch fork on my dodge coronet..can anyone help?
Top of the page Bottom of the page
56D500boy
Posted 2020-03-20 9:22 PM (#595811 - in reply to #595809)
Subject: RE: 1955 1956 clutch rod needed



Expert 5K+

Posts: 5778
5000500100100252525
Location: Lower Mainland BC
tailfins - 2020-03-20 5:43 PM

missing part that mates up to clutch fork on my dodge coronet..can anyone help?


So you have this

https://www.ebay.com/itm/NOS-MoPar-1955-58-Plymouth-Chrysler-Dodge-D...



BUT you are missing one of the many other linkage parts? Which one?





(55-56ClutchPedalPartDiagram.jpg)



Attachments
----------------
Attachments 55-56ClutchPedalPartDiagram.jpg (152KB - 8 downloads)
Top of the page Bottom of the page
tailfins
Posted 2020-03-22 8:19 PM (#595884 - in reply to #595809)
Subject: Re: 1955 1956 clutch rod needed


Expert

Posts: 1582
1000500252525
Location: calif
the first one that attaches to the fork
Top of the page Bottom of the page
56D500boy
Posted 2020-03-22 11:34 PM (#595893 - in reply to #595884)
Subject: Re: 1955 1956 clutch rod needed



Expert 5K+

Posts: 5778
5000500100100252525
Location: Lower Mainland BC
tailfins - 2020-03-22 5:19 PM
the first one that attaches to the fork


Work with me here. The 6-24-1 one or the 6-50-1 one? If you can point out the reference in the diagram, I can look up the PN and then search the internet for that part.



Edited by 56D500boy 2020-03-22 11:36 PM
Top of the page Bottom of the page
tailfins
Posted 2020-03-23 11:23 AM (#595913 - in reply to #595809)
Subject: Re: 1955 1956 clutch rod needed


Expert

Posts: 1582
1000500252525
Location: calif
those 2 as well as -23...thanks
Top of the page Bottom of the page
56D500boy
Posted 2020-03-23 2:56 PM (#595925 - in reply to #595913)
Subject: Re: 1955 1956 clutch rod needed



Expert 5K+

Posts: 5778
5000500100100252525
Location: Lower Mainland BC
tailfins - 2020-03-23 8:23 AM

those 2 as well as -23...thanks


I think that the parts you seek are 1409 763 and 1610 972 (see below). I didn't get any good hits via Google, or Mopar Mall or Hilltop so I think you might have to go used from Big M or French Lake Auto Parts or?

Otherwise, you might have to get creative and use aftermarket heim joints to create the link that you need.

There are lots out there:

https://www.summitracing.com/search?SortBy=BestKeywordMatch&keyword=...

https://www.amazon.com/slp/heim-joints/vqhsc99oewx33wr

*OR* really go nuts and modify a 8.5" Adjustable Tensioning Rod Heim Joint Alternator Bracket:

https://www.amazon.com/Team-Performance-Adjustable-Tensioning-Altern...








(55-56DodgeClutchRodPNs.jpg)



Attachments
----------------
Attachments 55-56DodgeClutchRodPNs.jpg (145KB - 7 downloads)
Top of the page Bottom of the page
Old Ray
Posted 2020-03-23 6:38 PM (#595937 - in reply to #595809)
Subject: RE: 1955 1956 clutch rod needed



Extreme Veteran

Posts: 404
100100100100
Location: Invermere B.C. Canada - Rocky Mountains
So that reads that Plymouth is different then Dodge ? And therefore the ones that are out of my '56 PLODGE (Canadian) 3 speed V 8 will not work?
Probably can't find them anyway.
Top of the page Bottom of the page
NM Desoto
Posted 2020-03-23 8:12 PM (#595939 - in reply to #595809)
Subject: RE: 1955 1956 clutch rod needed


Veteran

Posts: 104
100
Brewer's Performance repops many of the sixties clutch adjuster kits. Some are adaptable to the older cars. Also, Dodge trucks
used very similar parts for many years, check with your local salvage yards.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)