The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1956 Imperial Stainless Trim
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
jboymechanic
Posted 2020-04-25 11:54 PM (#597339)
Subject: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
Looking for the following trim pieces for my '56 Imperial:
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
-Passenger and Driver rocker panel trim

I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.

Thanks.

Edited by jboymechanic 2020-04-26 12:25 AM
Top of the page Bottom of the page
tailfins
Posted 2020-04-26 11:45 AM (#597351 - in reply to #597339)
Subject: Re: 1956 Imperial Stainless Trim


Expert

Posts: 1612
1000500100
Location: calif
how long are thw rocker trim panels u need?
Top of the page Bottom of the page
jboymechanic
Posted 2020-04-26 11:11 PM (#597387 - in reply to #597339)
Subject: RE: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
Looking for the following trim pieces for my '56 Imperial, updated list:

Stainless Steel
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
-Passenger and Driver rocker panel trim

Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)

I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.
Top of the page Bottom of the page
jboymechanic
Posted 2020-05-01 9:42 PM (#597621 - in reply to #597387)
Subject: RE: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
Looking for the following trim pieces for my '56 Imperial:

UPDATED LIST May 1, 2020:

Stainless Steel
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)

Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)

I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.
Top of the page Bottom of the page
tailfins
Posted 2020-05-04 11:16 AM (#597750 - in reply to #597339)
Subject: Re: 1956 Imperial Stainless Trim


Expert

Posts: 1612
1000500100
Location: calif
I have found some of these pieces,PM your email for pictues
Top of the page Bottom of the page
jboymechanic
Posted 2020-05-08 1:15 PM (#597953 - in reply to #597750)
Subject: Re: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
Looking for the following trim pieces for my '56 Imperial:

UPDATED LIST May 8, 2020:

Stainless Steel
-Passenger side rear wheel well trim
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)

Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)

I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.
Top of the page Bottom of the page
netparts
Posted 2020-05-09 2:19 AM (#597980 - in reply to #597339)
Subject: Re: 1956 Imperial Stainless Trim


Veteran

Posts: 135
10025
Location: California
Hi,
Here's a few pics from my 56 Imperial 4 door HT parts car.
Regards,
Gary



(IMG_4195.jpg)



(IMG_4196.jpg)



(IMG_4198.jpg)



(IMG_4199.jpg)



(IMG_4200.jpg)



(IMG_4202.jpg)



(IMG_4203.jpg)



(IMG_4205.jpg)



(IMG_4207.jpg)



(IMG_4208.jpg)



(IMG_4209.jpg)



Attachments
----------------
Attachments IMG_4195.jpg (108KB - 23 downloads)
Attachments IMG_4196.jpg (108KB - 23 downloads)
Attachments IMG_4198.jpg (134KB - 23 downloads)
Attachments IMG_4199.jpg (78KB - 23 downloads)
Attachments IMG_4200.jpg (75KB - 23 downloads)
Attachments IMG_4202.jpg (64KB - 22 downloads)
Attachments IMG_4203.jpg (104KB - 22 downloads)
Attachments IMG_4205.jpg (104KB - 23 downloads)
Attachments IMG_4207.jpg (80KB - 24 downloads)
Attachments IMG_4208.jpg (77KB - 25 downloads)
Attachments IMG_4209.jpg (78KB - 23 downloads)
Top of the page Bottom of the page
big m
Posted 2020-05-11 1:56 PM (#598087 - in reply to #597339)
Subject: Re: 1956 Imperial Stainless Trim



Expert 5K+

Posts: 7650
500020005001002525
Location: Williams California
Hi Jon,
I have two very nice LH dogleg moldings, the RF has a light scrape in it, and the RR has metal screws holding it on. The RH parking light brow is very nice with no pitting.

---John
Top of the page Bottom of the page
jboymechanic
Posted 2020-05-13 9:17 AM (#598186 - in reply to #598087)
Subject: Re: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
Thank you to Big M and the others on this site that have provided these parts that I've been looking for. Sill looking for a couple of trim pieces for my '56 Imperial:

UPDATED LIST May 13, 2020:

Stainless Steel
-Passenger side rear wheel well trim
-Passenger side rear dogleg (transitions from the rocker to the rear wheel well trim).

I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.
Top of the page Bottom of the page
jboymechanic
Posted 2020-05-27 10:03 PM (#598866 - in reply to #598186)
Subject: Re: 1956 Imperial Stainless Trim



Expert

Posts: 1865
10005001001001002525
Location: Muskego, WI
UPDATED LIST May 27, 2020:

Stainless Steel
-Passenger side rear wheel well trim
-Passenger side rear dogleg (transitions from the rocker to the rear wheel well trim).

Also need an original front windshield gasket. Must be 1955 or 1956 Imperial, Chrysler or DeSoto with sun visor trim.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)