The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

PS pump questions
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
brdtee
Posted 2020-04-28 6:11 AM (#597453)
Subject: PS pump questions



Veteran

Posts: 234
10010025
Location: Pieksamaki, Finland, Europe
My '57 is missing the original PS pump which should be the Thompson type with two groove pulley, slightly bigger in size than later model TRW-type pumps of the sixties.

I'm going to use a '62 TRW-model PS pump instead but it has a pulley with only one groove while there should be two grooves ... so far I haven't found any '62-66 TRW PS pumps with two groove pulley so I'm wondering if the pulley is interchangeable from GM's TRW-type PS pumps where two groove pulleys are available. Or does someone know where I could buy a correct pulley for the pump?

Or if someone has an extra '57 PS pump for sale, I'd be interested...
Top of the page Bottom of the page
hemidenis
Posted 2020-04-28 1:03 PM (#597465 - in reply to #597453)
Subject: Re: PS pump questions



Expert

Posts: 3719
20001000500100100
Location: Northen Virginia
Hothemiheads I think have a GM PS pump and bracket for the 392. Or is what I remember seen there. Of couse, it is far the looks of the over engineer piece of sh...Thompson. Ask Phil what happened when the Thomson decided to do a seizure in the middle of a French highway.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)