![]() | ||
The Forward Look Network | ||
| ||
![]() Moderators: Lancer Mike Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Local Regions -> Rocky Mountain Region | Message format |
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Installed some new wheel covers on the De Soto today. Adventurer style!
(spinners 1.jpg) (spinners 2.jpg) (spinners 3.jpg) Attachments ---------------- ![]() ![]() ![]() | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | The old wheel covers, for comparison: (05 Wilson Arch 102517.jpg) Attachments ---------------- ![]() | ||
| |||
matt![]() |
| ||
Veteran Posts: 143 ![]() ![]() Location: Malmberget, Sweden | Nice. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1229 ![]() ![]() ![]() ![]() Location: Ramona, CA | Looks great. | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Thanks fellas! I have to take them on a road test to make sure they are tight and don't spin. It was a suprisingly big project to put those things together! | ||
| |||
firedome![]() |
| ||
Expert Posts: 3156 ![]() ![]() ![]() ![]() ![]() Location: NY & VT | Looks spiffy! Are they NORS or OEM or? | ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10086 ![]() ![]() ![]() ![]() ![]() Location: So. Cal | Who did you use for chroming the centers? They look great. | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | I had been thinking about this for a long time. I started out buying a single 1956 Chrysler spinner cover here on the forward look site. It was totally pitted, but inexpensive. I held on to that for a long while and then bought a cheap 1957 De Soto wheel cover to see just how they fit together. Earlier this year, I bought a set of 1956 Chrysler Windsor spinner wheel covers on eBay; they had been for sale for a long time and I made an offer to the seller and we came to an agreement. The spinners were already repaired and rechromed (I don't know by whom) and they came with the red center caps. It was a leap of faith and very, very expensive. I then had to purchase a full set of 1957 De Soto wheel covers. I purchased several. To my surprise, there are at least three varieties of 1957 De Soto wheel covers! I had to buy a bunch of them to get a set that was up to the standards of the restored Chrysler spinners. I then had to cut the centers out of the De Soto wheel covers and I colored the silver portion with a light gold tint. I put the whole thing together and I think I have a reasonable representation of the 1958 Adventurer wheel covers with the exception of the center emblem. The 1956 Chrysler Windsor red emblem matches the color of my car, so I think it fits. In the end, I think it is a decent representation of the best wheel cover available for the 1958 De Soto with some modification (center cap). It is all made with original MoPar stock stuff, similar to how the the 1958 De Soto Adventurer wheel covers were fashioned. But holy cow! You talk about an expensive pain in the @ss! | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Here are a few images of the various steps in the process. What I learned:
(original test cover.jpg) (one of many.jpg) (colored and center cut out.jpg) (special tools, drilling bunk, and templates.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | For a guy who didn't quite like the standard wheel cover and didn't like the wire wheels, I think I found my happy place!
| ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10086 ![]() ![]() ![]() ![]() ![]() Location: So. Cal | It's a very good choice, and much better than the other two options, IMO. Why did you have to cut the centers on the hubcaps? | ||
| |||
firedome![]() |
| ||
Expert Posts: 3156 ![]() ![]() ![]() ![]() ![]() Location: NY & VT | Great job on fabricating custom wheel covers, very creative! | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Powerflite - Why did you have to cut the centers on the hubcaps? Thanks fellas! My "test" wheel cover came to me with the clip holding the wheel center installed upside down. Based on the marks on the back of the wheel center emblem, it had been that way for a long time. I thought that's the way it was suppose to be. It made installing the test spinner on the test wheel cover easy! However, I did notice that, once installed, the center emblem seemed too loose. The 1956 Windsor cover had the center blank and (although my images don't show them well at all) tabs surrounding the center hole. When the restored spinners arrived, they had the clip installed correctly, with the convex arc. As I tried to install those, it was evident that the 1957 De Soto wheel cover center portion had to be either mashed down or removed. (test spinner showing clip how it came.jpg) (clip how it should be.jpg) (1956 Windsor wheel cover front.jpg) (1956 Windsor wheel cover back.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() | ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10086 ![]() ![]() ![]() ![]() ![]() Location: So. Cal | My wheelcover came the same way as your first picture. The second way does hold it tight, but may scratch the emblem, but it does seem better to install it. | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Nathan are you making a set of these too?
| ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10086 ![]() ![]() ![]() ![]() ![]() Location: So. Cal | Yes, but the Chrysler version, not the DeSoto. | ||
| |||
Lancer Mike![]() |
| ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: The Centennial State | Always impressed!
| ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |