The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960-64 Wagon Rear Assist Handles (grab handles)
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
NicksGarage
Posted 2020-05-22 2:29 AM (#598615)
Subject: 1960-64 Wagon Rear Assist Handles (grab handles)



Expert

Posts: 1223
1000100100
Location: Ramona, CA
These are grab handles for a 1960 wagon. They fasten to the rear pillar and at the top of the roof. On my car, the top fastener is a Phillips head screw that goes into a nylon insert pressed into the roof. These other 1960 grab bars have a small carriage bolt with a tin nut inside the car. Both sets have the same casting number on them. The number on them doesn't match the parts book and the parts book shows a nut and bolt. It does list that there are 8 nuts required but the nut here is different than the ones that go on the three studs sticking through the pillar. I got an NOS set of handles for my wagon and they had the small screw hole like my originals.

They're supposed to be the same for all full-sized wagons from 1960-64. The set with the nuts came off a 1960 Plymouth Custom Suburban which interestingly didn't have a roof rack or third seat and appeared to be all original. All 1960 Chrysler wagons came standard with the grab bars. Optional on Dodge and Plymouth.





Edited by NicksGarage 2020-05-22 2:33 AM




(grab_handle2.jpg)



(grab_handle3.jpg)



(grab_handle4.jpg)



(grab_handle5.jpg)



(grab_handle6.jpg)



(grab_handle7.jpg)



(grab_handle8.jpg)



(grab_handle10.jpg)



(grab_handle9.jpg)



Attachments
----------------
Attachments grab_handle2.jpg (74KB - 165 downloads)
Attachments grab_handle3.jpg (61KB - 176 downloads)
Attachments grab_handle4.jpg (28KB - 167 downloads)
Attachments grab_handle5.jpg (96KB - 187 downloads)
Attachments grab_handle6.jpg (36KB - 171 downloads)
Attachments grab_handle7.jpg (31KB - 171 downloads)
Attachments grab_handle8.jpg (96KB - 175 downloads)
Attachments grab_handle10.jpg (245KB - 182 downloads)
Attachments grab_handle9.jpg (12KB - 189 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2020-05-28 11:19 PM (#598930 - in reply to #598615)
Subject: Re: 1960-64 Wagon Rear Assist Handles (grab handles)



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Here's another thing I noticed. The set that came off the 1960 Plymouth wagon have shorter studs in them than the ones on my Chrysler. Are the pillars thinner on a Plymouth? There aren't many extra threads sticking out on mine mounted to the car.





(grab_handle11.jpg)



Attachments
----------------
Attachments grab_handle11.jpg (235KB - 185 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)