The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Power Windows
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
dels56
Posted 2020-07-26 5:07 PM (#601373)
Subject: Power Windows


Regular

Posts: 67
2525
Does anyone know which way the wire loom tubes go in? I can't find a good picture to help me. Also can you give me a measurement between the holes the loom goes through



(IMG_6290 2.JPG)



(Window Loom Length (2).jpg)



Attachments
----------------
Attachments IMG_6290 2.JPG (30KB - 30 downloads)
Attachments Window Loom Length (2).jpg (109KB - 31 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2020-07-27 1:19 AM (#601388 - in reply to #601373)
Subject: Re: Power Windows



Expert 5K+

Posts: 6810
50001000500100100100
Location: So. California
The flanged end of it goes into the body of the car, and the straight part goes into the door. The vertical distance between the holes is about 7.5", but you have them backwards from the way my '57 is setup. The higher hole is on the body and the lower hole is on the door, just above the lower door hinge.
Top of the page Bottom of the page
dels56
Posted 2020-07-27 11:45 AM (#601395 - in reply to #601373)
Subject: Re: Power Windows


Regular

Posts: 67
2525
Thanks for the info. Question, what is the approximate length of the tubes use on your are 9-1/2 tip to tip, about 9 from flange to tip. Bought mine from Gary Goers before Quincey took over.

Del S.
Top of the page Bottom of the page
Powerflite
Posted 2020-07-27 6:08 PM (#601407 - in reply to #601373)
Subject: Re: Power Windows



Expert 5K+

Posts: 6810
50001000500100100100
Location: So. California
Mine is about 12" from the flange. It enters the door at about the 11" mark.
Top of the page Bottom of the page
dels56
Posted 2020-07-27 6:24 PM (#601408 - in reply to #601373)
Subject: Re: Power Windows


Regular

Posts: 67
2525
Thanks, I can work with that.
Del
Top of the page Bottom of the page
dels56
Posted 2020-08-01 12:10 AM (#601559 - in reply to #601373)
Subject: Re: Power Windows


Regular

Posts: 67
2525
As mentioned above, I purchased the loom tubes from Gary Goers. They are approximately 9” long. The vertical distance between the hole in the body an d the hole in the door is too great for this length of tube. Even if the distance between the holes was less I am having trouble visualizing the flex and the movement of the tube in the upper hole. I would appreciate seeing photos of the tube in place if someone has a 56 with power windows.
Del
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)