The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

RB Hipo Manifolds?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
HemiSportFury
Posted 2020-11-23 3:15 PM (#605960)
Subject: RB Hipo Manifolds?


Member

Posts: 39
25
Location: SW Colorado
I am installing a 440 in my 57 Belvedere and wonder if any of the hipo exhaust manifolds would work? If so which year and application. I would prefer manifolds over headers since I'm more interested in a quite cruiser than maximum performance. Thanks for any input.
Top of the page Bottom of the page
Mike P
Posted 2020-11-28 9:39 AM (#606122 - in reply to #605960)
Subject: Re: RB Hipo Manifolds?


Extreme Veteran

Posts: 585
500252525
Location: SE Arizona
When I did my 57 Dodge (installed a 440) I used a 69 C body drivers side HIPO manifold to clear the PS box if I remember correctly. The passenger side HIPO manifolds are all pretty much the same and clear well.
Top of the page Bottom of the page
AceS
Posted 2020-11-28 4:56 PM (#606133 - in reply to #606122)
Subject: Re: RB Hipo Manifolds?



Veteran

Posts: 291
100100252525
Location: WA/USA
I fitted a 440 and B body HP manifolds in mine before taking it all apart (57 Coronet). It fit great, however I have a manual steering box and manual brakes so that affords a lot more room. The B/RB HP manifolds are all pretty much the same except for the angle and orientation of the dump. I think if you choose one that is straight down and you'll be in the best shape.
Top of the page Bottom of the page
1960fury
Posted 2020-11-28 5:11 PM (#606135 - in reply to #605960)
Subject: RE: RB Hipo Manifolds?



Expert 5K+

Posts: 7513
50002000500
Location: northern germany
HemiSportFury - 2020-11-23 3:15 PM

I am installing a 440 in my 57 Belvedere and wonder if any of the hipo exhaust manifolds would work? If so which year and application. I would prefer manifolds over headers since I'm more interested in a quite cruiser than maximum performance. Thanks for any input.


My headers were quiter than the OE cast iron manifolds and that w/o the crossover pipe that I had before.
Top of the page Bottom of the page
Powerflite
Posted 2020-11-28 6:31 PM (#606138 - in reply to #605960)
Subject: Re: RB Hipo Manifolds?



Expert 5K+

Posts: 9967
5000200020005001001001001002525
Location: So. Cal
If you use headers that are thicker gauge metal, like 16 gauge or better, and the flange is machined flat so that it seals well, then they will be quiet. The Chinese headers I used on my '56 Plymouth had terribly warped flanges on them but the metal they used was very thick, probably 14 gauge. I machined the flanges flat, and they were very quiet afterward.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)