The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1961 Chrysler Windsor 383 6.3 litre
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
Arocket111
Posted 2023-04-13 8:04 AM (#628894)
Subject: 1961 Chrysler Windsor 383 6.3 litre



Regular

Posts: 67
2525
Hi I am looking for help with finding an electronic ignition preferably with an integral coil in the unit are their any available that will fit the 383 engine I have looked at the large red cap HEI type and it looks as though it will clash with the rocker cover
I would rather not go with the type that has a control box separate as I have had issues with failure on my Dodge
I would consider the type that fits in the original distributor I am running a single points distributor currently
Any help suggestions appreciated thanks Phil
Top of the page Bottom of the page
Shep
Posted 2023-04-13 8:32 AM (#628895 - in reply to #628894)
Subject: Re: 1961 Chrysler Windsor 383 6.3 litre



Expert

Posts: 3399
20001000100100100252525
Location: Chestertown, NY ( near Lake George)		Tried D.U.I., they list them for your engine, maybe,
Top of the page Bottom of the page
Powerflite
Posted 2023-04-13 5:44 PM (#628907 - in reply to #628894)
Subject: Re: 1961 Chrysler Windsor 383 6.3 litre



Expert 5K+

Posts: 9681
500020002000500100252525
Location: So. Cal		Pertronix makes electronic modules that will fit into a dual point distributor.

I sell these brackets to mount an HEI module to the bottom of a Mopar electronic distributor.
http://www.designed2drive.com
Top of the page Bottom of the page
LostDeere59
Posted 2023-04-24 4:56 PM (#629110 - in reply to #628907)
Subject: Re: 1961 Chrysler Windsor 383 6.3 litre



Extreme Veteran

Posts: 406
100100100100
Location: Hilltown, PA
Powerflite - 2023-04-13 5:44 PM


I sell these brackets to mount an HEI module to the bottom of a Mopar electronic distributor.
http://www.designed2drive.com


^^^^ This is by far the best option. Looks just about fatory original, performs well, and you can get generic GM HEI modules everywhere if you have a failure on the road. Pretty sure Walmart stocks them . . .


Gregg
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)