Viewing a thread - 60-62 Chrysler turn signal switch

You are logged in as a guest. ( logon | register )

60-62 Chrysler turn signal switch Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Electrical, Battery and Charging	Message format

imopar380

Posted 2023-06-11 12:06 PM (#630151)
Subject: 60-62 Chrysler turn signal switch

Expert 5K+

Posts: 7207
5000

Location: Victoria, BC, on Vancouver Island, Canada

This is a spare 60-62 Chrysler turn signal switch. (I have removed the cover over the wires...) Have any of you ever had one of these apart? This has 2 wires (pink and brown) broken off their respective terminals, but I am not positive which terminals each one goes to. (there are possibly 3 terminals)

(20230610_171506.jpg)

Attachments
----------------

20230610_171506.jpg (205KB - 51 downloads)

wizard

Posted 2023-06-11 12:50 PM (#630155 - in reply to #630151)
Subject: Re: 60-62 Chrysler turn signal switch

Board Moderator & Exner Expert 10K+

Posts: 13049
5000

Location: Southern Sweden - Sturkö island

Ian, since I connected the wires wrong on a 62 Imperial, my best guess is this;

(20230610_171506.jpg)

Attachments
----------------

20230610_171506.jpg (195KB - 56 downloads)

imopar380

Posted 2023-06-12 12:27 AM (#630161 - in reply to #630151)
Subject: Re: 60-62 Chrysler turn signal switch

Expert 5K+

Posts: 7207
5000

Location: Victoria, BC, on Vancouver Island, Canada

Someone alerted me to the answer on the Chrysler 300 Club tech pages https://chrysler300club.com/tech/tsignal/1.html

This switch is a spare, and not needed at the moment. It'll get repaired now that I know where to connect the wires.

Edited by imopar380 2023-06-12 12:29 AM

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)