The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Fuel Tank Questions
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
georgeb
Posted 2023-09-05 12:03 PM (#631735)
Subject: Fuel Tank Questions


Member

Posts: 31
25
Location: Washington, D.C.
Putting the fuel tank on the 58 Chrysler I’m restoring. Is there a grommet where the fuel tank meets the filler tube? And, how is the tank vented? Does it need a vented gas cap? Thanks
Top of the page Bottom of the page
Powerflite
Posted 2023-09-05 1:10 PM (#631736 - in reply to #631735)
Subject: Re: Fuel Tank Questions



Exner Expert 10K+

Posts: 10016
50005000
Location: So. Cal
It isn't vented, so you will need a vented gas cap. Or it wouldn't be a bad idea to braze a tube to the tank, if you wanted to create a ventilation system on it. There is a seal for the tube. Vans sells them separately, as well as the new tanks.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)