The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

60 - 61 dodge speedo cluster are they different
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
moparl
Posted 2024-03-13 3:43 AM (#634184)
Subject: 60 - 61 dodge speedo cluster are they different


Veteran

Posts: 195
100252525
Location: SOUTH DUNEDIN NEW ZEALAND		Hi just enquiring on 1961 dodge phoenix speedo cluster is it the same as 1960 dodge pioneer ,phoenix, they look very similar, mine has a frosted see thru lens any information will be greatly appreciated
Thanks
Alan Smith
Sunny dunedin
New Zealand
Top of the page Bottom of the page
moparl
Posted 2024-03-13 5:55 PM (#634190 - in reply to #634184)
Subject: RE: 60 - 61 dodge speedo cluster are they different


Veteran

Posts: 195
100252525
Location: SOUTH DUNEDIN NEW ZEALAND		Hi have figured out 61 dodge milage odometer is different from 60 problem solved
Top of the page Bottom of the page
geoffs60
Posted 2024-03-14 4:34 AM (#634194 - in reply to #634190)
Subject: RE: 60 - 61 dodge speedo cluster are they different


Veteran

Posts: 165
1002525
Location: christchurch New Zealand		HI Alan, I am sure i have a 61 cluster, biggest snag with the 60/61s is a bounching speedo needle, the speedo shaft runs directly thru the die cast hsg
rather than thru a bush, as they wear the speedo is all over the place.
Geoff
Top of the page Bottom of the page
wizard
Posted 2024-03-14 5:04 AM (#634195 - in reply to #634184)
Subject: Re: 60 - 61 dodge speedo cluster are they different



Board Moderator & Exner Expert 10K+

Posts: 13054
50005000200010002525
Location: Southern Sweden - Sturkö island		I've repaired some speedometers using the small tube on the tip of a lead pencil. The pens with refill leads.
Just cut it off, adapt to the shaft and when all looks good secure with super glue.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)