[GFS] Build Sheet ?s
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GFS] Build Sheet ?s

Hi GFSers,

Need some expertise on the build sheet for the '56 Fury.  I still haven't
sent for mine, but GFSer Dan Long did for his and has some questions (he
does not have a PC, so can't get on this chat list).

His '56 Fury shows a body type of "62", and got a comment back they were
unable to decode?!  Our body # plate shows 404-E-XXXX, why didn't they use
404 instead of "62".  Does "62" mean 2 dr hdtp for all the model lines,
i.e., Savoy, Belvedere & Fury?

Also, his color code (along the top margin) shows 657 which Chrysler
historical said means the correct eggshell white, but down below on the
build sheet (old type computer punch card), under "Paint Codes", there is
a punch out next to "turquoise blue gray", but nothing punched against
"eggshell white" - do these paint codes refer to the trunk floor, body
bottom color which was a bluish grey and not the exterior color?

His trim code is 525, which again he was told they were "unable to
decode".  Anyone with knowledge on this one?

Last item is his motor number - it is shown as "P29", not "FP29".  I know
on the many 303 blocks I have seen, the stamped "F" looks like an
afterthought stamp compared to the rest of the stamping, was the "F"
omitted on the build sheet?

If anyone can offer some clarifications/insights, would appreciate it and
I will get back to Dan Long with your input.


Jack Lewis

[Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.

To unsubscribe from this group, send an email to:


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 

<<attachment: winmail.dat>>

Home Back to the Home of the Forward Look Network