[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hello All:
    Regarding the coil and spring brackets  for the 56-58 Fury 2 x 4 
    The June 1957 Plymouth Product  Information News has a picture of the 2 x 
4 High Performance Kit for the 1956  277 and 303 engines and the 1957 277, 
301 and 218 [sic]  (318?) engines.
    In that picture, I can clearly  identify the coil bracket which is 
proposed be reproduced.   Therefore, the coil bracket would be correct for the 56 
and 57 Fury's  with the 2 x 4 carburetors.  I assume it would be correct also 
for the  58's.
    Also in that picture, I can identify  two springs, one shorter than the 
other.  I do not see anything resembling  spring brackets, however.  Spring 
brackets probably came along shortly  later, or were inadvertently omitted from 
the photo.  I am going to assume  that spring brackets are correct for my 56 
and order a set or two.
    If any of you happen to have this  bulletin, note that the carburetors 
will not bolt to the manifold shown.   The bolt patters are different.  The 
carburetors shown have the "H"  pattern bolt pattern on an aluminum throttle body. 
 The manifold  is for the larger cast iron throttle body bolt pattern.
    Questions or comments are  welcome.
    John  Teske 

[Non-text portions of this message have been removed]

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of the Forward Look Network