Re: [GFS] REPRODUCTION ENGINE PARTS--290HP 318
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [GFS] REPRODUCTION ENGINE PARTS--290HP 318



Thanks John
We are at 8-9

----- Original Message -----
From: Bjwt56@xxxxxxx
Date: Thursday, April 27, 2006 3:06 pm
Subject: Re: [GFS] REPRODUCTION ENGINE PARTS--290HP 318

> Ed:
> 
>    I had better put in my order, so I  would like at one set of 
> carburetor 
> spring brackets and one coil  bracket.  
> 
>    I already have a nice coil bracket  that I had made of 
> stainless at a 
> local sheet metal shop from a drawing I got  from John Paxo.  It 
> does not have 
> the studs like you are proposing to make.  I used sheet metal screws.
> 
>    In my write up of the June 1957  Plymouth Bulletin picture, I 
> made one 
> mistake.  The WCFB carburetors  in the picture have the aluminum 
> square base 
> rather than the "H"  base.  The manifold has the "H" bolt pattern 
> for later 
> WCFB's and  AFB's.  I managed to find a pair of the original 
> aluminum  square based 
> WCFB's and had them professionally restored in  Florida.  I also 
> have the 
> correct aluminum manifold.  When I get time,  I will install them 
> on my 56 along 
> with the manual choke as shown in the  picture, and of course the 
> spring 
> brackets when they become  available.
> 
>    John  Teske
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/goldenfin/

<*> To unsubscribe from this group, send an email to:
    goldenfin-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network