IML: rear leaf springs

["kenneth chilton" <finfan@xxxxxxxxxxxxx>]

hello  usa

having just renewed the exhaust on our 57 crown  my attention has turned to 
the rear springs, which are so badly worn that the [ arc ]  is the opposite 
way .   i am seriously  thinking of buying new ones from the states  and 
shipping them over but it is not cheap .
if by chance i  had  them retempered  and reshaped    is there any 
measurements  that i should be giving the spring shop  to ensure that they 
are   bent to the  correct arc ,   ie  overall length of spring when bent   
depth of arc  etc  .

is  retempering   a recommended way of fixing sagging springs  or should one 
aim for new

regards ken  uk

_________________________________________________________________
Be the first to hear what's new at MSN - sign up to our free newsletters! 
http://www.msn.co.uk/newsletters



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm