RE: IML: LeBaron Rear Window Filler - Paint the fiberglass area?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: LeBaron Rear Window Filler - Paint the fiberglass area?



Kenyon,

I haven't seen one of those fiberglass plugs myself, but I have to agree
with the concerns of the paint cracking and filler popping from the
different expansion rates.

I agree with the idea of painting the top.  I have a couple ideas.  First,
it might be possible to reinforce the existing plug with extra layers of
'glass to make it stronger.  Don't know if this would actually work with the
used piece or not.  If you have one from a parts car to experiment with, I'd
say go for it.

Next up would be to use the original one to make a mold and form a new
stronger one from fiberglass.  Then you could make it larger than the
original to feather out beyond the seams.  All the metal under the plug must
be rust free or it will bubble to the surface ruining the look of your slick
roof.

Now for the idea I really like.  Using the original piece as a guide, have a
new plug fabricated out of steel, then have it welded into the roof.  This
would be the most expensive way to go, but I believe it would give you the
best results.  An old body guy might be able to do it, or you might need to
see a metal fabricator.  Somebody that really knows how to work the metal.
Compared to some of your other ideas for this car, this might not be the
most costly part of the project.

Rob McCall
'67 LeBaron

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Kenyon Wills
Sent: Monday, March 06, 2006 12:47 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: LeBaron Rear Window Filler - Paint the fiberglass area?

I am eyeing a 72 Le Baron coupe. 

I have customising aspirations to have a painted roof and don't think that
there is any rust, but will be yanking the ratty top off.? I am planning to
then cover whatever is there with body filler and smooth it, then paint the
top instead of redoing in vynyl.? 

Any reason that this is a bad idea as far as smoothing over what's there and
making it all look like it's one sheet of steel/smooth from a cosmetic
standpoint?? I like the smaller rear window and want to keep it.

Kenyon Wills
?
?




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.