Re: IML: Window Felts for 1966 Crown

["david munson" <davidmunson30@xxxxxxxxxxx>]

I have a 63 Imperial convertible and I am looking for the window channelling 
the goes in the frame of the quarter light /vent window that the drivers 
door main glass slides in at its leading edge  does anybody know what I am 
talking about and do you have this channeling........ Is it felt covered 
plastic ????????? I know it not the usual stuff that I can find .

David Munson


> From: SpicemanII@xxxxxxx
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: Re: IML: Window Felts for 1966 Crown
> Date: Tue, 8 Aug 2006 12:35:12 EDT
>
> I carry in stock weatherstrip, trunk seals, roof rail and door seal rubber. 
> I
> will need a sample of what you have for door felt. I also have quarter 
> window
> rubber. Sometimes the seals and etc for Imperials also fits B and other C
> bodies. It is sometimes of a different length. I also carry A & E body 
> stuff.
> Specifically for Imperials, I do have battery clamp kits. It is the Z 
> looking one
> for about 69 and newer. I have others, but need a pic and measurments of
> yours to know if what I have fits. I also have the battery clamp studs that 
> bolt
> to the fender well in different lengths for the battery. Two bolts holds 
> it. I
> also have the J bolts for the engine side of the battery.
>    I also have the body bumpers for the hood, trunk, doors, ash tray, 
> license
> plate etc. Joe Machado  I am going to be at the Monterey Bay Mopar show
> selling stuff and I will be in my #06 Daytona pulling my 28 foot enclosed 
> car
> trailer.




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm