Re: IML: Static on AM radio??
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Static on AM radio??



Radio Shack used to sell a kit of capacitors and inductors to splice into the power supply wire behind the dashboard.  It worked pretty well.  If they stopped carrying it, try a auto sound specialty joint that does its own installs.  They are bound to offer something similar.  Whatever you buy, put it as close to the radio as possible.  You may end up dismantling the dashboard.  A suppression capacitor on the alternator might have come loose or deteriorated as well.  The fact  you hear noise from other sources besides ignition itself would tend to eliminate need to change spark plug wires.  Did this just start or has it always been there?  --TH

anthony romano <mamrom@xxxxxxx> wrote:
Does anyone know how to fix the static on the AM stations. When the engines is off there is no static on the radio. I also here the wipe blades and the turning signal through the radio? -Thanks
 
(93 Imperial Stock radio)


Stay in the know. Pulse on the new Yahoo.com. Check it out.

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.