Re: IML: Door Handle Removal Tool - 56 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Door Handle Removal Tool - 56 Imperial



---- tdcox <tdcox@xxxxxxxxxxxxx> wrote: 
> I have a 56 coupe and am trying to remove the door handles.  I have acquired
> a FSM and see what I am supposed to do, but do not have the tool used to
> safely remove the handle.  I have googled and searched Hemmings but don't
> find a likely source.  Any suggestions?
> 
>  MOST PARTS STORES CARRY A TOOL FOR REMOVING THE DOOR HANDLES. NAPA SHOULD HAVE THEM.  IT IS A PRETTY CHEAP TOOL.   IT IS REAL THIN AND ABOUT 8 " LONG AND HAS A COUPLE OF NOTCHES IN IT TO PUSH THE CLIP OUT.
> 
> I have tried bending the tip of a kitchen knife to get it behind the spring
> clip but haven't been successful in removing the handle.  Any other
> thoughts?
> 
>  
> 
> Tom Cox
> 
>  
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.