Re: IML: Thermostatic Vacuum Delay Switch - 68 LeBaron
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Thermostatic Vacuum Delay Switch - 68 LeBaron
- From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
- Date: Fri, 5 Jan 2007 20:28:23 -0800
This bracket talk reminds me of the contraption like bracket that holds my
power steering pump on my 67. I cant figure why it was made that way.
Chris in Petaluma, Ca.
----- Original Message -----
From: "Klebert L. Hall" <swampyankee@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, January 05, 2007 2:37 PM
Subject: Re: IML: Thermostatic Vacuum Delay Switch - 68 LeBaron
From: "Ken Lang" <ken@xxxxxxxxxxx>
Subject: RE: IML: Thermostatic Vacuum Delay Switch - 68 LeBaron
I'm mostly concerned with the proper mounting of the item. Currently
it's
hanging from the diagonal support by a piece of bailing wire. The FSM
doesn't show the actual mounting. Once I figure out what's wrong with
the
system and fix it, I'd like to mount this switch in its original
position.
If it's the same thing as in my '69 (don't know why not), then the
heater valve mounts into a bracket that goes on the wheel well. One of the
coolant hoses attaches to a pipe (part of the bracket) so that coolant
goes right through the bracket. The bracket's a wierdly complex part,
considering I can't see why it's actually needed - seems like the valve
would work fine, hanging from a piece of wire. They even went so far as to
braze a cupric metal part (that pipe) to a ferrous metal part (the
bracket) - you wouldn't see that kind of thing nowadays.
I have an extra bracket, if it's the right thing.
-Kle.
'69 Crown 4DHT
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network