Re: IML: High output Starter For 60imp 383
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: High output Starter For 60imp 383



HI  Henry, schumacher creative services is there a number of them  ?  Or  location? E- mail ?
----- Original Message -----
Sent: Sunday, March 18, 2007 10:37 PM
Subject: Re: IML: High output Starter For 60imp 383

You may want to look at Schumacher Creative Services headers before
you have them custom made.  These headers are both efficient and
compact.

Henry

On 3/18/07, James    L BURTON <brnxbmbr@xxxxxxx> wrote:
>
> Well, I had the original engine rebuilt, I thought that it was also a 413
> but  looking closer I was convinced that it is 383.  The original starter
> takes up so much space  . And it makes this engine deprived of the
> horsepower it should easily obtain, for the custom headers I'm going to have
> made for it. The has an extreme make over and it needs the Hi output smaller
> starter.
> ----- Original Message -----
> From: Bill Watson
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Sunday, March 18, 2007 4:12 AM
> Subject: Re: IML: High output Starter For 60imp 383
>
>
> Also, starters for 1962 and up V8 engines will not fit pre-1962 engines.
> Before 1962 Chrysler used Autolite direct-drive starters.  Starting in 1962,
> Chrysler-built reduction gear starters were used.   The problem lies in the
> ring gear - the number of teeth on the gear was changed along with the
> starter.
>
> 1962-64 Dodge 880 and Chryslers with manual transmissions continued to use
> direct-drive stafters as did Canadian-built 1962-66 slant six models
> (Prestolite starter).
>
>
> Bill
> Vancouver, BC
>
>
> ----- Original Message -----
> From: JIM LORENZEN
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Sunday, March 18, 2007 12:07 AM
> Subject: Re: IML: High output Starter For 60imp 383
>
>
> Hi Jim -
> Are you sure about the 383?  As far as I know, unless your Imperial has had
> a heart transplant, it should have a 413.
> Just curious -
> Jim L. in OR
> ----- Original Message -----
> From: James L BURTON
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Sunday, March 18, 2007 12:43 AM
> Subject: IML: High output Starter For 60imp 383
>
>
> Hi,everybody, Im trying to locate a high output starter for a strong 383
> .Sure could use some help. A model number would be nice also. Its for a 60
> imperial.  Thank you Jim
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>


--
Henry K. Blair, Jr.
4365 Butternut Way
Roswell, GA   30075-5225
(678) 248-4903, (770) 998-4897, Cell (770) 827-7392
henryblairjr@xxxxxxxxxxxxx
henryblairjr@xxxxxxxxx


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.