Re: IML: adjusting rear end 69 LeBaron
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: adjusting rear end 69 LeBaron



Frederick Joslin <fljoslin@xxxxxxxx> wrote:
I am in the process of putting the rear end of my 69 LeBaron back together. I have the driver side axle in and torqued to 35 ft/lbs.
What is the best way to proceed with the axle wiith the adjuster? I have read the FSM and would like some additional suggestions/input.
The ONLY way to get the axle shaft end play adjustment set correctly is to follow the procedure outlined in the shop manual.  You'll need to have a dial indicator mounted to the brake support as shown in the '73 manual at http://www.imperialclub.com/Yr/1973/FSM/Chassis/html/03-034.htm
When you set the end play, wiggle the axle in and out of the housing a few times and check it again . . . and then do this again a couple more times just to be sure.

If the end play is not set correctly, you'll be doing the job again in short order.

Good luck!

Elijah


Imperial Power Window Switch Repair - http://home.comcast.net/~imperial1971/

Find Repair & Shop Manuals, Parts Books, History & More at The Imperial Bookshelf!
http://home.comcast.net/~imperial1971/Bookshelf.html

My Collection of Imperials - http://www.imperialclub.com/~imperial71/
1965 Imperial LeBaron
1967 Chrysler Newport Custom Sedan
1970 Imperial LeBaron
1971 Imperial LeBaron


Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.