IML: Installing Replacement Tail Light Lenses on a '62
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Installing Replacement Tail Light Lenses on a '62



To the Group;

Have any of you installed new replacements for '62 tail light lenses?  If so, what size Phillips screws did you use?  I am reluctant to use very large screws of the sheet metal type unless they have a self tapping feature so that I can slowly cut threads into the plastic, backing them out repeatedly and blowing out any shavings until the screw will seat properly.  The replacement lenses were quite expensive and I don't want to run the risk of cracking them while installing them.  The person who I bought them from years ago has passed away, so he is no longer around to ask any questions of.

Joe

begin:vcard
fn:Joe Strickland
n:Strickland;Joe
adr;dom:;;1021 Vaughan Lane;Tioga;TX;76271
version:2.1
end:vcard



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.